Accessing Meshlium. make it easy!

When you buy Meshlium it comes with all the radios ready to be used. Just "plug & mesh!". All the Meshlium nodes come with the Wifi AP ready so that users can connect using their Wifi devices. Connect the ethernet cable to your network hub, restart Meshlium and it will automatically get an IP from your network using DHCP*.

* For the Meshlium Mesh AP and for the Meshlium ZigBee Mesh AP the Internet connection depends on the GW of the network.

Then access Meshlium through the Wifi connection. First of all search the available access points and connect to "Meshlium".

meshlium wifi ap signal

No password is needed as the network is public (you can change it later in the Wifi AP Interface options). When you select it, Meshlium will give an IP from the range 10.10.10.10 - 10.10.10.250.

Now you can open your browser and access to the Meshlium Manager System:

  http://10.10.10.1/ManagerSystem
  user:  root
  passw: libelium  
meshlium login page
meshlium home screen

If your network does not offer DHCP service Meshlium starts with a default IP (192.168.1.100). In this case you can connect Meshlium through the Wifi connection (which is always available) or with the crossover cable provided with Meshlium.

If you want to access to the Manager System using the crossover ethernet cable go to:

  http://192.168.1.100/ManagerSystem
  user:  root
  passw: libelium  

© Libelium Comunicaciones Distribuidas S.L.

| Terms of use