Development

Communication / 3G + GPS:

» 3G 01: Changing power mode from ON to POWER_OFF

This example shows how to change the power mode from ON to POWER_OFF using the function setMode().

Required Materials

1 x Waspmote
1 x battery
1 x 3G + GPS module

Notes

- This example must be mastered by those users who want increase battery life reducing the power consumption of the 3G + GPS board
- 3G module must be powered with a battery
- When 3G is in use, interrupts can't be used
- This exampe can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------  3G_01 - Changing power mode from ON to POWER_OFF  -------- 
 *  
 *  Explanation: This example shows how to change the power mode from ON 
 *  to POWER_OFF using the function setMode()
 *  
 *  Copyright (C) 2014 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           1.1
 *  Design:            David Gascón 
 *  Implementation:    Alejandro Gállego
 */

#include "Wasp3G.h"

int8_t answer;

void setup()
{
    // setup for Serial port over USB:
    USB.ON();
    USB.println(F("USB port started..."));

    // 1. activates the 3G module:
    answer = _3G.ON();
    if ((answer == 1) || (answer == -3))
    {
        USB.println(F("3G module ready..."));

        // 2. changes the power mode from ON to _3G_POWER_OFF:
        USB.println(F("Changing power mode to _3G_POWER_OFF")); 
        USB.println(F("This mode only powers off the 3G module."));
        USB.println(F("UART 1 still active and the mux is connected to the 3G module."));
        USB.println(F("To power down the 3G module and close the UART use \"_3G.OFF()\""));

        if (_3G.setMode(_3G_POWER_OFF) == 1)
        {
            USB.println(F("Mode changed succesfully"));
        }
        else
        {
            USB.println(F("Error changing power mode"));
        }    

    }
    else
    {
        // Problem with the communication with the 3G module
        USB.println(F("3G module not started"));
    }

    // 3. powers of the 3G module
    _3G.OFF();
}

void loop()
{
}

Output

H#
USB port started...
3G module ready...
Changing power mode to _3G_POWER_OFF
This mode only powers off the 3G module.
UART 1 still active and the mux is connected to the 3G module.
To power down the 3G module and close the UART use "_3G.OFF()"
Mode changed succesfully

Quick Publish: