Development

Communication / 3G + GPS:

» 3G 26: Sending email with SMTP

This example shows how to send an email with SMTP and how to attach a file to the email

Required Materials

1 x Waspmote
1 x battery
1 x 3G + GPS module
1 x SIM card
1 x GPRS/3G antenna

Notes

- 3G module must be powered with a battery
- When 3G is in use, interrupts can't be used
- The email servers must work without SSL function
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  --------------- 3G_26 - Sending email with SMTP ----------------- 
 *  
 *  Explanation: This example shows how to send an email with SMTP and 
 *  how to attach a file to the email.
 *  
 *  Copyright (C) 2014 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           1.1
 *  Design:            David Gascón 
 *  Implementation:    Alejandro Gállego 
 */


#include "Wasp3G.h"

char apn[] = "apn";
char login[] = "login";
char password[] = "password";

int count=0;
int answer=0;

char picture_name[30];

void setup()
{
    USB.println(F("**************************"));
    // 1. sets operator parameters
    _3G.set_APN(apn, login, password);
    // And shows them
    _3G.show_APN();
    USB.println(F("**************************"));
}



void loop(){ 

    USB.ON();
    USB.println(F("Starting"));

    // 2. activates the 3G module:
    answer = _3G.ON();
    if ((answer == 1) || (answer == -3))
    {
        USB.println(F("3G module ready..."));

        _3G.setTime();
        // 3. sets pin code
        USB.println(F("Setting PIN code..."));
        // **** must be substituted by the SIM code
        if (_3G.setPIN("****") == 1) 
        {
            USB.println(F("PIN code accepted"));
        }
        else
        {
            USB.println(F("PIN code incorrect"));
        } 

        USB.print(F("Connecting to the network..."));    

        // 4. waits for connection to the network
        answer = _3G.check(180);    
        if (answer == 1)
        { 
            USB.println(F("connected"));    

            // 5. Sets SMTP parameters
            USB.print(F("Setting SMTP server parameters..."));
            answer = _3G.setSMTPserver("SMTP server", server_port, "STMP_account", "password");
            if (answer == 1)
            {
                USB.println(F("done"));

                // 6. Sets email parameters
                USB.print(F("Setting e-mail parameters..."));
                answer = _3G.setSMTPfrom("sender address", "sender");
                answer += _3G.setSMTPrecipient(0, 0, "recipient address", "TO");
                answer += _3G.setSMTPsubject("subject");
                answer += _3G.setSMTPbody("body");
                if (answer == 4)
                {   
                    USB.println(F("done"));
                    USB.print(F("Attaching the picture..."));
                    // Goes to the pictures folder into the SD  card
                    _3G.goRoot(1);
                    _3G.cd("Picture");
                    // 7. Attachs a picture
                    if (_3G.setSMTPattach( 1, picture_name) == 1)
                    {
                        USB.println(F("done"));                        
                        USB.print(F("Sending the e-mail..."));
                        // 8. Sends the email
                        if ( _3G.setSMTPsend() == 1)
                        {                            
                            USB.println(F("done!"));
                        }
                        else
                        {
                            USB.println(F("fail"));
                        }
                    }
                    else
                    {
                        USB.println(F("fail"));
                    }
                }
                else
                {
                    USB.println(F("fail"));
                }            
            }
            else
            {
                USB.print(F("fail. Error code:"));
                USB.println(answer, DEC);
            }
        }
        else
        {
            USB.println(F("3G module cannot connect to the network..."));
        }
    }
    else
    {
        // Problem with the communication with the 3G module
        USB.println(F("3G module not started"));
    }

    // 9. Powers off the 3G module
    _3G.OFF();

    USB.println(F("Sleeping..."));

    // 10. sleeps one hour:
    PWR.deepSleep("00:01:00:00", RTC_OFFSET, RTC_ALM1_MODE1, ALL_OFF);


}

Output

Starting
3G module ready...
Setting PIN code...
PIN code accepted
Connecting to the network...connected
Setting SMTP server parameters...done
Setting e-mail parameters...done
Attaching the picture...done
Sending the e-mail...done!
Sleeping...

Quick Publish: