/* * ------ [900HP_02] - send packets to a gateway -------- * * Explanation: This program shows how to send packets to a gateway * indicating the MAC address of the receiving XBee module * * Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. * http://www.libelium.com * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * * Version: 3.0 * Design: David Gascón * Implementation: Yuri Carmona */ #include #include // Destination MAC address ////////////////////////////////////////// char RX_ADDRESS[] = "0013A20040A63E21"; ////////////////////////////////////////// // Define the Waspmote ID char WASPMOTE_ID[] = "node_01"; // define variable uint8_t error; void setup() { // init USB port USB.ON(); USB.println(F("Sending packets example")); // store Waspmote identifier in EEPROM memory frame.setID( WASPMOTE_ID ); // init XBee xbee900HP.ON(); } void loop() { /////////////////////////////////////////// // 1. Create ASCII frame /////////////////////////////////////////// // create new frame frame.createFrame(ASCII); // add frame fields frame.addSensor(SENSOR_STR, "new_sensor_frame"); frame.addSensor(SENSOR_BAT, PWR.getBatteryLevel()); // show frame to send frame.showFrame(); /////////////////////////////////////////// // 2. Send packet /////////////////////////////////////////// // send XBee packet error = xbee900HP.send( RX_ADDRESS, frame.buffer, frame.length ); // check TX flag if( error == 0 ) { USB.println(F("send ok")); // blink green LED Utils.blinkGreenLED(); } else { USB.println(F("send error")); // blink red LED Utils.blinkRedLED(); } // wait for five seconds delay(5000); } 900HP 02: Send packet | Libelium

Development

» 900HP 02: Send packet

This program shows how to send packets to a gateway indicating the MAC address of the receiving XBee module

Required Materials

1 x Waspmote
1 x Battery
1 x MicroUSB wire
1 x XBee-PRO 900HP

Notes

- The battery has to be connected.
- This example can be executed in Waspmote v15

Code

/*  
 *  ------ [900HP_02] - send packets to a gateway -------- 
 *  
 *  Explanation: This program shows how to send packets to a gateway
 *  indicating the MAC address of the receiving XBee module 
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           3.0 
 *  Design:            David Gascón 
 *  Implementation:    Yuri Carmona
 */
 
#include <WaspXBee900HP.h>
#include <WaspFrame.h>
 

// Destination MAC address
//////////////////////////////////////////
char RX_ADDRESS[] = "0013A20040A63E21";
//////////////////////////////////////////

// Define the Waspmote ID
char WASPMOTE_ID[] = "node_01";

// define variable
uint8_t error;


void setup()
{
  // init USB port
  USB.ON();
  USB.println(F("Sending packets example"));

  // store Waspmote identifier in EEPROM memory
  frame.setID( WASPMOTE_ID );

  // init XBee
  xbee900HP.ON();
  
}


void loop()
{
  ///////////////////////////////////////////
  // 1. Create ASCII frame
  ///////////////////////////////////////////  

  // create new frame
  frame.createFrame(ASCII);  
  
  // add frame fields
  frame.addSensor(SENSOR_STR, "new_sensor_frame");
  frame.addSensor(SENSOR_BAT, PWR.getBatteryLevel()); 
  
  // show frame to send
  frame.showFrame();


  ///////////////////////////////////////////
  // 2. Send packet
  ///////////////////////////////////////////  

  // send XBee packet
  error = xbee900HP.send( RX_ADDRESS, frame.buffer, frame.length );   
  
  // check TX flag
  if( error == 0 )
  {
    USB.println(F("send ok"));
    
    // blink green LED
    Utils.blinkGreenLED();
    
  }
  else 
  {
    USB.println(F("send error"));
    
    // blink red LED
    Utils.blinkRedLED();  
  }
  
  // wait for five seconds
  delay(5000);
}

Output

H#
Sending packets example
===============================
Current ASCII Frame:
Length: 61
Frame Type: 134
frame (HEX): 3C3D3E86022332323330353330453639354234414230236E6F64655F30312330235354523A6E65775F73656E736F725F6672616D65234241543A393523
frame (STR): <=>�#2230530E695B4AB0#node_01#0#STR:new_sensor_frame#BAT:95#
===============================
send ok
===============================
Current ASCII Frame:
Length: 62
Frame Type: 134
frame (HEX): 3C3D3E86022332323330353330453639354234414230236E6F64655F30312331235354523A6E65775F73656E736F725F6672616D65234241543A31303023
frame (STR): <=>�#2230530E695B4AB0#node_01#1#STR:new_sensor_frame#BAT:100#
===============================
send ok
===============================
Current ASCII Frame:
Length: 62
Frame Type: 134
frame (HEX): 3C3D3E86022332323330353330453639354234414230236E6F64655F30312332235354523A6E65775F73656E736F725F6672616D65234241543A31303023
frame (STR): <=>�#2230530E695B4AB0#node_01#2#STR:new_sensor_frame#BAT:100#
===============================
send ok

Quick Publish: