Development

Examples:

Communication / Sigfox

» Sigfox 02: Send data string

Last edition: Jan 10th, 2017 |

This example shows how to send a Sigfox packet. In this example, the message to be sent is defined as a string. This string defines the diferente HEX values of the bytes to be sent

» Sigfox 03: Send data array

Last edition: Jan 10th, 2017 |

This example shows how to send a Sigfox packet. In this example, the message to be sent is defined as an array of bytes. It is necessary to indicate the length of this array.

» Sigfox 04: Send string with ACK

Last edition: Jan 10th, 2017 |

This example shows how to send a Sigfox packet waiting for a ACK (acknowledgement) to arrive. In this example, the message to be sent is defined as a string. This string defines the diferente HEX values of the bytes to be sent

» Sigfox 05: Send array with ACK

Last edition: Jan 10th, 2017 |

This example shows how to send a Sigfox packet waiting for a ACK (acknowledgement) to arrive. In this example, the message to be sent is defined as an array of bytes. It is necessary to indicate the length of this array.

» Sigfox 08: Sigfox TX test

Last edition: Jan 10th, 2017 |

This example shows how perform a Sigfox TX test.

The possible settings are:

--> count = 0..65535: Count of SIGFOX test RF messages

--> period = 1..255 Period in seconds between SIGFOX test RF messages

--> channel = 0 to 180 or 220 to 400 or -1 (random channel)

» Sigfox P2P 01: Configure module

Last edition: Jan 10th, 2017 |

This example shows how to configure the module for P2P operation. This example shows how to set/get:
- LAN address
- LAN mask
- LAN frequency channel
- LAN power level

» Sigfox P2P 06: LAN to Sigfox GW

Last edition: Jan 10th, 2017 |

This example shows how to receive multiple packets from a LAN network. Then all packets received are sent to the Sigfox network. Thus, this node will act as gateway from a LAN network to the Sigfox infrastructure