Development

Mote Runner:

Sensor Boards / Smart Metering

This is the development section of the Waspmote Mote Runner platform. You can navigate through the examples with the left bar.

If you actually want to see examples about the original Waspmote platform, please go its specific development section.

» MR-SM 01: Current Sensor Reading

Last edition: Jan 10th, 2017 |

In this example the Smart Metering sensor board is turned on and the current sensor read every second approximately, printing the result through the USB port.

» MR-SM 02: Flow Sensor Reading

Last edition: Jan 10th, 2017 |

In this example the Smart Metering sensor board is turned on and the flow sensor, placed on socket 5, read every second approximately, printing the result through the USB port.

» MR-SM 03: Humidity Sensor Reading

Last edition: Jan 10th, 2017 |

In this example the Smart Metering sensor board is turned on and the humidity sensor read every sixteen seconds approximately, printing the result through the USB port.

» MR-SM 04: Load Cell Sensor Reading

Last edition: Jan 10th, 2017 |

In this example the Smart Metering sensor board is turned on, the load cell placed on socket 9 powered at 5V and read approximately every six seconds, printing results through the USB port.

» MR-SM 06: LDR Sensor Reading

Last edition: Jan 10th, 2017 |

In this example the Smart Metering sensor board is turned on and the luminosity sensor read every second approximately, printing the result through the USB port.

» MR-SM 07: Ultrasound Sensor Reading

Last edition: Jan 10th, 2017 |

In this example the Smart Metering sensor board is turned on and the ultrasound sensor, placed on socket 3, read every second approximately, printing the result through the USB port.