Development

Examples:

Sensors / Smart Water Ions

» SWI 02: pH Sensor Reading

Last edition: Jan 10th, 2017 |

Turn on the Smart Water Ions Sensor Board and reads the pH sensor extracting the value from the calibration values and temperature compensation

» SWI 03: Socket1 Sensor Reading

Last edition: Jan 10th, 2017 |

Turn on the Smart Water Ions Sensor Board and reads the Ion sensor connected in the SOCKET1 printing the result through the USB. In this case we are going to measure Calcium Ion, but all Ions can be connected in the four available sockets.

» SWI 04: Socket2 Sensor reading

Last edition: Jan 10th, 2017 |

Turn on the Smart Water Ions Sensor Board and reads the DI sensor connected in the SOCKET2 printing the result through the USB. In this case we are going to measure Calcium Ion, but all Ions can be connected in the four available sockets

» SWI 05: Socket3 Sensor Reading

Last edition: Jan 10th, 2017 |

Turn on the Smart Water Ions Sensor Board and reads the Ion sensor connected in the SOCKET3 printing the result through the USB. In this case we are going to measure Fluoride Ion, but all Ions can be connected in the four available sockets.

» SWI 06: Socket4 Sensor Reading

Last edition: Jan 10th, 2017 |

Turn on the Smart Water Ions Sensor Board and reads the Ions sensor connected in the SOCKET4 printing the result through the USB. In this case we are going to measure Chloride Ion, but all Ions can be connected in the four available sockets.

» SWI 07: Plug&Sense Reading

Last edition: Jan 10th, 2017 |

This is an specific example to be used with Plug&Sense Platform. In this example we can see how to read from each socket of the Plug&Sense device.