Development

Communication / Bluetooth Low Energy:

» BLE 19 Get own mac

This example shows how to know the BLE module MAC address

Required Materials

1 x Waspmote
1 x Battery
1 x Bluetooth Low Energy module
1 x Bluetooth module antenna
1 x Expansion board (if socket 1 is used)
1 x SD card

Notes

Socket 0 is used by default
EEPROM is used in this example by default.
Never unplug module while Waspmote is turned ON.
Bluetooth module antenna should be connected.
The battery must be connected in ANY example.

Code

/*
 *  ------------------ [BLE_19] - Get own mac ------------------- 
 *
 *  Explanation: This example shows how to know the BLE module MAC address
 *
 *  Copyright (C) 2014 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 *  Version:		0.1
 *  Design:		David Gascón
 *  Implementation:	Javier Siscart
 */
#include <WaspBLE.h>
void setup() 
{
  USB.println(F("BLE_19 Example"));

  // 0. Turn BLE module ON
  BLE.ON(SOCKET0);
 
  // 2. Print MAC address
  USB.print("BLE MAC is: ");
  USB.println(BLE.getOwnMac()); 

}

void loop() 
{
  delay(1000);
}

Output

E#
BLE_19 Example
BLE MAC is: 000780789EEB

Quick Publish: