Development

Communication / Bluetooth PRO:

» BT Pro 04: Scan with friendly name

This example shows how to scan for bluetooth devices including friendly name of each device.

Required Materials

1 x Waspmote
1 x Battery
1 x Coin battery
1 x Bluetooth module Pro
1 x Bluetooth module antenna
1 x Expansion board (if socket 1 is used)
1 x SD card

Notes

Socket 1 will be used to connect Bluetooth module (using expansion board)
Socket 0 can also be used, plugging module directly.
It is recommended to set RTC time to your actual time.
SD card must be inserted to allow saving discovered devices.
Never unplug module while Waspmote is turned ON.
Bluetooth module antenna should be connected.
The battery must be connected in ANY example.

Code

/*
 *  ------------------ [BT PRO_04] - Scan with friendly name ----------------- 
 *
 *  Explanation: This example shows how scan devices including friendly
 *  name of each device.
 *
 *  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 *  Version:		0.1
 *  Design:		David Gascón
 *  Implementation:	Javier Siscart
 */

#include "WaspBT_Pro.h"

void setup()
{

  // Setup for Serial port over USB
  USB.ON();
  USB.println(F("USB port started..."));

  // Turn On Bluetooth module
  BT_Pro.ON(SOCKET1);

}

void loop()
{

  // 1. Name scan
  USB.println(F("Scan 5sc."));
  BT_Pro.scanNetworkName(5,TX_POWER_6);
  USB.print(F("discovered: "));
  USB.println(BT_Pro.numberOfDevices, DEC);

  // 2. Prints results of last inquiry (only debug)
  BT_Pro.printInquiry();

}

Output

B#USB port started...
Scan 5sc.
discovered: 6

9c:4a:7b:95:5a:30; 5a0204; -72; P;
00:1a:70:90:b3:28; 5a0000; -43; O;
00:1e:3d:a6:64:12; 3e0104; -88; O;
00:25:d3:b0:5f:2e; 4a010c; -80; O;
00:16:a4:03:76:54; 5a0100; -69; O;
00:07:80:4a:c6:50; 000000; -74; O;
Friendly names:
9c:4a:7b:95:5a:30 "Libelium Mobile"
00:1a:70:90:b3:28 "Libelium1"
00:1e:3d:a6:64:12 "Libelium3"
00:25:d3:b0:5f:2e "Libelium4"
00:16:a4:03:76:54 "Libelium2"
00:07:80:4a:c6:50 "MeshliumBT"
Total: 06

Quick Publish: