Development

Communication / GPRS:

» GPRS 04: Changing power mode from ON to sleep

This example shows how change the power mode from ON to sleep

Required Materials

1 x Waspmote
1 x Battery
1 x GPRS_Pro module

Notes

This example must be mastered by those users who want increase battery life reducing the power consumption of the GPRS_Pro module
GPRS_Pro module must be powered with a battery
When GPRS_Pro is in use, interrupts can't be used

Code

/*  
 *  ------  GPRS_04 - Changing power mode from ON to sleep  -------- 
 *  
 *  Explanation: This example shows how change the power mode from ON 
 *  to sleep mode
 *  
 *  Copyright (C) 2014 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           0.3 
 *  Design:            David Gascón 
 *  Implementation:    Alejandro Gállego
 */

#include "WaspGPRS_Pro.h"
int answer;

void setup()
{
    // setup for Serial port over USB:
    USB.ON();
    USB.println(F("USB port started..."));

    // 1. activates the GPRS_SIM908 module:
    answer = GPRS_Pro.ON(); 
    if ((answer == 1) || (answer == -3))
    {
        USB.println(F("GPRS_Pro module ready..."));
        
        // 2. changes the power mode from ON to OFF:
        USB.println(F("Changing power mode to sleep")); 
        
        if (GPRS_Pro.setMode(GPRS_PRO_SLEEP) == 1)
        {
            USB.println(F("Mode changed succesfully"));
        }
        else
        {
            USB.println(F("Error changing power mode"));
        }
    }
    else
    {
        USB.println(F("GPRS_Pro module NOT ready..."));
    }
}

void loop()
{
}

Output

B#
USB port started...
GPRS_Pro module ready...
Changing power mode to sleep
Mode changed succesfully

Quick Publish: