Development

General / Power:

» Power 03: Hibernate mode

This example shows how to set Waspmote in the lowest power consumption mode, disconnecting all the board but RTC, which powers from auxiliary battery.

Required Materials

1 x Waspmote
1 x MiniUSB wire
1 x Battery

Notes

- IMPORTANT: The first time you run this code, the Hibernate switch MUST be turned OFF before the red led lights off (3 seconds after switch Waspmote PRO ON).
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ [PWR_3] Setting Hibernate Mode -------- 
 *  
 *  Explanation: This example shows how to set Waspmote in the lowest 
 *  power consumption mode, disconnecting all the board but RTC, which
 *  powers from auxiliary battery.
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           3.0
 *  Design:            David Gascón 
 *  Implementation:    Marcos Yarza
 */

void setup()
{  
  // Checks if we come from a normal reset or an hibernate reset
  PWR.ifHibernate();

  USB.ON();
  USB.println(F("PWR_3 example"));


}

void loop()
{

  // If Hibernate has been captured, execute the associated function
  if( intFlag & HIB_INT )
  {
    hibInterrupt();
  }


  USB.println(F("enter hibernate mode"));


  // Set Waspmote to Hibernate, waking up after 10 seconds
  PWR.hibernate("00:00:00:10",RTC_OFFSET,RTC_ALM1_MODE2);
}

void hibInterrupt()
{
  USB.println(F("---------------------"));
  USB.println(F("Hibernate Interruption captured"));
  USB.println(F("---------------------"));
  intFlag &= ~(HIB_INT);  
  delay(5000);
}

Output

H#
PWR_3 example
enter hibernate mode
---------------------
Hibernate Interruption captured
---------------------

Quick Publish: