/* * ------Waspmote WIFI_11 Example-------- * * Explanation: This example shows how to join to a WEP encrypted AP * * Copyright (C) 2013 Libelium Comunicaciones Distribuidas S.L. * http://www.libelium.com * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * * Version: 0.2 * Design: David Gascón * Implementation: Joaquin Ruiz */ // Include WIFI library #include // choose socket (SELECT USER'S SOCKET) /////////////////////////////////////// uint8_t socket=SOCKET0; /////////////////////////////////////// // WiFi AP settings ///////////////////////////////// #define ESSID "libelium_AP" #define AUTHKEY "1234567890abc" // 13 characters (104 bits) ///////////////////////////////// void setup() { // Switch ON the WiFi module on the desired socket if( WIFI.ON(socket) == 1 ) { USB.println(F("Wifi switched ON")); } else { USB.println(F("Wifi did not initialize correctly")); } // 1. Configure the transport protocol (UDP, TCP, FTP, HTTP...) WIFI.setConnectionOptions(CLIENT); // 2. Configure the way the modules will resolve the IP address. WIFI.setDHCPoptions(DHCP_ON); // 3. Configure how to connect the AP WIFI.setJoinMode(MANUAL); // *** Wired Equivalent Privacy (WEP) *** // 4. Sets WEP encryptation // 13 Characters WIFI.setAuthKey(WEP, AUTHKEY); // 5. Store Values WIFI.storeData(); } void loop() { // switch WiFi ON WIFI.ON(socket); // Call join the AP if (WIFI.join(ESSID)) { USB.println(F("joined AP")); // Displays Access Point status. USB.println(F("\n----------------------")); USB.println(F("AP Status:")); USB.println(F("----------------------")); WIFI.getAPstatus(); // Displays IP settings. USB.println(F("\n----------------------")); USB.println(F("IP Settings:")); USB.println(F("----------------------")); WIFI.getIP(); USB.println(); } else { USB.println(F("not joined")); } // Switch WiFi OFF WIFI.OFF(); USB.println(F("*****************************")); // delay 2 seconds delay(2000); } Wifi 11: Join WEP encrypted AP | Libelium

Development

» Wifi 11: Join WEP encrypted AP

This example shows how to join to a WEP encrypted AP

Required Materials

1 x Waspmote
1 x Battery
1 x WiFi Module

Notes

- The battery has to be connected.
- Plug the antenna in the SMA connector.
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------Waspmote WIFI_11 Example--------
 *
 *  Explanation: This example shows how to join to a WEP encrypted AP
 *  
 *  Copyright (C) 2013 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 2 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 *  Version:                0.2
 *  Design:                 David Gascón
 *  Implementation:         Joaquin Ruiz
 */
 
// Include WIFI library 
#include <WaspWIFI.h>

// choose socket (SELECT USER'S SOCKET)
///////////////////////////////////////
uint8_t socket=SOCKET0;
///////////////////////////////////////

// WiFi AP settings 
/////////////////////////////////
#define ESSID "libelium_AP"
#define AUTHKEY "1234567890abc" // 13 characters (104 bits)
/////////////////////////////////

void setup()
{
  // Switch ON the WiFi module on the desired socket
  if( WIFI.ON(socket) == 1 )
  {    
    USB.println(F("Wifi switched ON"));
  }
  else
  {
    USB.println(F("Wifi did not initialize correctly"));
  }
  
  // 1. Configure the transport protocol (UDP, TCP, FTP, HTTP...)
  WIFI.setConnectionOptions(CLIENT);
  // 2. Configure the way the modules will resolve the IP address.
  WIFI.setDHCPoptions(DHCP_ON);
  // 3. Configure how to connect the AP
  WIFI.setJoinMode(MANUAL);
  
  // *** Wired Equivalent Privacy (WEP) *** 
  // 4. Sets WEP encryptation // 13 Characters 
  WIFI.setAuthKey(WEP, AUTHKEY); 
  
  // 5. Store Values
  WIFI.storeData();
}

void loop()
{  
  // switch WiFi ON 
  WIFI.ON(socket);
  
  // Call join the AP 
  if (WIFI.join(ESSID)) 
  { 
    USB.println(F("joined AP"));

    // Displays Access Point status.
    USB.println(F("\n----------------------"));
    USB.println(F("AP Status:"));
    USB.println(F("----------------------"));
    WIFI.getAPstatus();

    // Displays IP settings.
    USB.println(F("\n----------------------"));
    USB.println(F("IP Settings:"));
    USB.println(F("----------------------"));
    WIFI.getIP();
    USB.println();        
  }
  else
  {
    USB.println(F("not joined"));
  }
  
  // Switch WiFi OFF
  WIFI.OFF();  
  
  USB.println(F("*****************************"));
  
  // delay 2 seconds
  delay(2000);   
}

Output

H#
Wifi switched ON
joined AP

----------------------
AP Status:
----------------------
SSid=libelium_AP
Chan=6
Assoc=OK
Rate=12, 24Mb
Auth=OK
Mode=WEP
DHCP=OK,renew=64800
Boot=2234
Time=FAIL
Links=1
<2.32>

----------------------
IP Settings:
----------------------
IF=UP
DHCP=ON
IP=10.10.10.11:2000
NM=255.255.255.0
GW=10.10.10.1
HOST=0.0.0.0:2000
PROTO=TCP_CLIENT,
MTU=1524
FLAGS=0x7
TCPMODE=0x0
BACKUP=0.0.0.0
<2.32>

*****************************

Quick Publish: