OTAP prog

zoeyeo · **Joined:** Tue Mar 13, 2012 6:04 am **Posts:** 21

Hi Libelium,

I am able to scan node now, this is what i receive

Code:

Total Nodes: 1 - Time elapsed: 18s
0       - Node 0013a200406972db - WASPMOTE00000001  - ,-./012 - READY

Why isn't it shows prog001? Is it because I have to type and name a program myself and upload it in the SD card? Or ,-./012 is my program name?

ps: I need the reply asap.

Thank you.

zoeyeo · **Joined:** Tue Mar 13, 2012 6:04 am **Posts:** 21

The SD card I have is 1.83gb, is it because of this reason? Therefore the command prompt shows ,-./012 instead of prog001.

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7440

Hi zoeyeo,

if you uploaded that code through OTAP, yes, that's probably the reason why you are not seeing it.

Did you purchase that SD card in Libelium? In that case, please fulfill this form so we can start an RMA process and return a correct card to you:

http://www.libelium.com/support/technicalservice

If not, I'm afraid we cannot guarantee its operation on our products.

Regards.

zoeyeo · **Joined:** Tue Mar 13, 2012 6:04 am **Posts:** 21

Hi Libeloum,

Yes I used the otap example code. So now I need to get the right memory card and put it in, the program will work eventually?

Anyway, those prog001 showed in the command prompt, they are programs that are already in the OTAP code or we have to code it ourselves?

Thank you.

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7440

Hi zoeyeo,

those prog001 indicated in the guide is the program uploaded to the mote using OTAP, the one we used, when you have a working SD card you'll have to upload yours and you may select the name you wish, not necessary that one.

Regards.

zoeyeo · **Joined:** Tue Mar 13, 2012 6:04 am **Posts:** 21

Okay, I will try it out!

Is it a must to have files inside the SD card we then can proceed on with get_boot_list, Delivery, sending the program, start a new program , reset and delete a program?

Thank you.

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7440

Hi zoeyeo,

no, you don't need to have anything previously stored in the SD, you only need to have a program in it if you want to start a new program, but you may upload it over the air.

Regards.