Pin No in the prototype board and documentation

ozguys · **Joined:** Thu Apr 08, 2010 1:13 pm **Posts:** 42

Hi,

Just would like to ask if there any difference in the pin no shown in the documentation and whats marked in the PCB.

Page 5 of the sensor board documentation shows pin layout. It shows pin 1 to pin 33. ( http://www.libelium.com/documentation/w ... rd_eng.pdf )

However the marking on the actual prototype board seems to be different. For example as per the documentation, pin no 6 is ANALOG6. However the marking on the PCB indicates that pin no 6 is ANALOG5 (A5)

Did we misunderstand something

Thanks

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7516

Hi ozguys,

you are right, the pin numbers printed on the board correspond to a former version of the pin display that was modified in the API, the correct pin layout is the one in the documentation of the boards (Waspmote or prototyping board).

Thanks for your help, we will fix it in future boards.