Hi.

I have the waspmote board with event sensor board, waspmote gateway with bluetooth board and a wt32 board.

Im using the waspmote board as a transmitter and the wt32 as a receiver.

so the waspmote board im suppose to upload the sending data codes right with the reading temp right?

what does the gateway do? is it necessary to use it?

how do i make a connection between the transmitter and receiver?

thanks

Dear sarina,

We are quite confused because we have no wt32 board. Are you referring to Bluetooh Radio for Device Discovery? check it here.

Could you please explain a bit more what are you trying to do and which parts are involved?

We will try to find the best solution.

Waiting your comments.

Regards!

Hi.

- waspmote board
- event sensor board
- bluetooth board
- waspmote gateway with bluetooth board
- temperature sensor MCP9700A

i have these few components.

what are the codes to upload to the board to read the temperature data and the timings and to store into the access database.

ive tried many codes but i still dont understand them.

as for the wt32 its another board im using. that i will figure out how when i can get the ide codes to upload to the waspmote board.

thanks.

Dear sarina,

Please check example codes provided with IDE for each module. They will help you understand each module separately and its main features.

We also provide a lot of documentation and technical guides, to make easier starting with Waspmote.

Furthermore, checklist post is also useful and even other post, please we kindly ask you to read in our forum due to many of your initial doubts are already answered.

Finally, we would be happy to answer your future questions, but please be more specific in order to make easier for us to give you the best solution.

Kind regards