Leaf wetness and PT-1000 sensors sockets

Wasp_01 · **Joined:** Wed Aug 08, 2012 4:28 pm **Posts:** 4

Hello,

As it is shown in the technical guide for Agriculture PRO board, the soil temperature sensor (PT-1000) socket is the same as for the leaf wetness sensor.
Does this mean than the two sensors can't be used in the same board, or there are some other optional pins that can be used instead?

Best regards,

Wasp_01 · **Joined:** Wed Aug 08, 2012 4:28 pm **Posts:** 4

In the Sockets for casing part everything is correctly described, unlike in the Sensors section, so we have solved the problem. I'm sorry for the inconvenience.

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7440

Wasp_01,

Glad to hear that you finally understood sensor connection.

However we do not understand where you find a mistake in the Agriculture guide.
On page 6 there is a general description of each socket and PT1000 and leaf wetness sockets are different. Moreover, on page 10 leaf wetness socket is described correctly and same for PT1000 on page 19.

Best Regards.