I am using Windows Vista but with a simple configuration in order to work better. Waspmote work fine, it's not the first application that I have done, maybe Xbee doesn't work properly, I don't know. This is the code I'm using:
Quote:
/*
* ------Waspmote XBee 802.15.4 Sending & Receiving Example------
*
* Explanation: This example shows how to send and receive packets
* using Waspmote XBee 802.15.4 API
*
* This code sends a packet to another node and waits for an answer from
* it. When the answer is received it is shown.
*
* Copyright (C) 2009 Libelium Comunicaciones Distribuidas S.L.
* http://www.libelium.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Version: 0.2
* Design: David Gascón
* Implementation: Alberto Bielsa
*/
packetXBee* paq_sent;
int8_t state=0;
long previous=0;
char* data="Test message!";
int g=0;
uint8_t PANID[2]={0x12,0x34};
void setup()
{
// Inits the XBee 802.15.4 library
xbee802.init(XBEE_802_15_4,FREQ2_4G,NORMAL);
// Powers XBee
xbee802.ON();
}
void loop()
{
// Set params to send
paq_sent=(packetXBee*) calloc(1,sizeof(packetXBee));
paq_sent->mode=BROADCAST;
paq_sent->MY_known=0;
paq_sent->packetID=0x52;
paq_sent->opt=0;
xbee802.hops=0;
xbee802.setOriginParams(paq_sent, "5678", MY_TYPE);
xbee802.setDestinationParams(paq_sent, "0013A2004052414B", data, MAC_TYPE, DATA_ABSOLUTE);
xbee802.sendXBee(paq_sent);
if( !xbee802.error_TX )
{
XBee.println("ok");
}
free(paq_sent);
paq_sent=NULL;
// Waiting the answer
previous=millis();
while( (millis()-previous) < 20000 )
{
if( XBee.available() )
{
xbee802.treatData();
if( !xbee802.error_RX )
{
// Writing the parameters of the packet received
while(xbee802.pos>0)
{
XBee.print("Network Address Source: ");
XBee.print(xbee802.packet_finished[xbee802.pos-1]->naS[0],HEX);
XBee.print(xbee802.packet_finished[xbee802.pos-1]->naS[1],HEX);
XBee.println("");
XBee.print("MAC Address Source: ");
for(int b=0;b<4;b++)
{
XBee.print(xbee802.packet_finished[xbee802.pos-1]->macSH[b],HEX);
}
for(int c=0;c<4;c++)
{
XBee.print(xbee802.packet_finished[xbee802.pos-1]->macSL[c],HEX);
}
XBee.println("");
XBee.print("Network Address Origin: ");
XBee.print(xbee802.packet_finished[xbee802.pos-1]->naO[0],HEX);
XBee.print(xbee802.packet_finished[xbee802.pos-1]->naO[1],HEX);
XBee.println("");
XBee.print("MAC Address Origin: ");
for(int d=0;d<4;d++)
{
XBee.print(xbee802.packet_finished[xbee802.pos-1]->macOH[d],HEX);
}
for(int e=0;e<4;e++)
{
XBee.print(xbee802.packet_finished[xbee802.pos-1]->macOL[e],HEX);
}
XBee.println("");
XBee.print("RSSI: ");
XBee.print(xbee802.packet_finished[xbee802.pos-1]->RSSI,HEX);
XBee.println("");
XBee.print("16B(0) or 64B(1): ");
XBee.print(xbee802.packet_finished[xbee802.pos-1]->mode,HEX);
XBee.println("");
XBee.print("Data: ");
for(int f=0;f<xbee802.packet_finished[xbee802.pos-1]->data_length;f++)
{
XBee.print(xbee802.packet_finished[xbee802.pos-1]->data[f],BYTE);
}
XBee.println("");
XBee.print("PacketID: ");
XBee.print(xbee802.packet_finished[xbee802.pos-1]->packetID,HEX);
XBee.println("");
XBee.print("Type Source ID: ");
XBee.print(xbee802.packet_finished[xbee802.pos-1]->typeSourceID,HEX);
XBee.println("");
XBee.print("Network Identifier Origin: ");
while( xbee802.packet_finished[xbee802.pos-1]->niO[g]!='#' )
{
XBee.print(xbee802.packet_finished[xbee802.pos-1]->niO[g],BYTE);
g++;
}
g=0;
XBee.println("");
free(xbee802.packet_finished[xbee802.pos-1]);
xbee802.packet_finished[xbee802.pos-1]=NULL;
xbee802.pos--;
}
previous=millis();
}
}
}
delay(1000);
}
