the original code?

justforfun · **Joined:** Mon Apr 02, 2012 6:57 am **Posts:** 61

well guys i want the original programming code which hard been already installed inside my waspmote -not the gateway. Just wondering where can i find the oringinal code.
And y i cant receive the data from waspmote gateway when i program a waspmote?
i have follow all the steps in this link, viewtopic.php?f=14&t=7700
able to get data direct by using a usb cable, but not using waspmote gateway....
Do i have to program waspmote gateway also , or is there anything i miss out?
I just started using this waspmote...

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7440

Hi justforfun,

you can find the start program for the different XBee modules in this post:

viewtopic.php?f=14&t=7741

Regarding your other question, the Waspmote Gateway cannot be programmed since it doesn't contain a microcontroller or another processing unit, it is just an interface to receive and send data from or to Waspmote from a serial terminal. You can find many samples of code for communication in the IDE's XBEE Examples section, just select the one according to the model you have, and let us know your results.

Regards.

justforfun · **Joined:** Mon Apr 02, 2012 6:57 am **Posts:** 61

o....k... but my xbee is xbee pro s2

justforfun · **Joined:** Mon Apr 02, 2012 6:57 am **Posts:** 61

try all doesnt work at all.....

justforfun · **Joined:** Mon Apr 02, 2012 6:57 am **Posts:** 61

I use waspmote-IDE software and Xbee pro S2
here are the errors:
ZB
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

XSC
In function 'void setup()':
error: 'xbee' was not declared in this scope

DM
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

900
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

868

avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

802

avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

justforfun · **Joined:** Mon Apr 02, 2012 6:57 am **Posts:** 61

justforfun wrote:

I use waspmote-IDE software and Xbee pro S2
here are the errors:
ZB
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

XSC
In function 'void setup()':
error: 'xbee' was not declared in this scope

DM
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

900
avrdude: stk500_getsync(): not in sync: resp=0x00
nvm edit i forgot to on my waspmote
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

868

avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

802

avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51

justforfun · **Joined:** Mon Apr 02, 2012 6:57 am **Posts:** 61

solve thx for the help, i was careless that i forgot to turn on my waspmote .
the error showing is cant upload when i dun turn on my waspmote

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7440

Hello justforfun,

Never mind, this errors are common when starting the study of Waspmote.

Please be sure of reading the Waspmote's Check List, and study each step in detail:
viewtopic.php?f=14&t=7700&start=0

Also, there are several guides that should be read to get a good knowledge of Waspmote, and they can be found here:
http://www.libelium.com/development/waspmote
http://www.libelium.com/support/waspmote

Best regards