Integrating WSN with revit (BIM software) using API

afathy41 · **Joined:** Mon Dec 05, 2011 11:45 pm **Posts:** 1

Dear All,

I am creating a 3D model for a building using a software called Revit. This software allows me to create some add-ins using API (C# or VB.NET).

I want to integrate the signals sent from the WSN with the 3D model through an add-in using API.

for example: temperature sensor is put in a certain room, if the temperature in this room is below the desired level the sensor will send a signal to the 3D model created indicating that there is problem in this room. CAN I DO THAT USING YOUR WSN OR NOT?

Thanks very much

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7475

Dear afathy41,

For that issue we are asking you to contact our commercial department and explain your application. they will recommend you the best choice to carry out your purposes.

You can contact by phone, mail, or filling the form of next link.

http://www.libelium.com/company/contact

Kind regards.

ferheen090 · **Joined:** Sun May 27, 2012 9:29 pm **Posts:** 1

Hello , i am also doing this integration , if you have implemented this idea then can you share details with me ?

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7475

ferheen090,

We have not implemented afathy41's design but, as we told afathy41, you can ask our commercial department and they will give you the best choice to carry out your tasks.

Best Regards.