Wrong OTAP output for "scan_nodes" (Win / Linux)

aggelos · **Joined:** Thu Feb 23, 2012 4:32 pm **Posts:** 32

Hi all,

i am having the exact same problem idi had, however in my case i can't set API output mode 2 in my xbees (XBEE-ZB).
After pressing the write button in xctu it informs me that everything went ok, but when i press the read button to
confirm it, AO has the last value.
I have tried various combinations between the coordination and end devices API modes with no success.

Any help would be appreciated.

Cheers

aggelos · **Joined:** Thu Feb 23, 2012 4:32 pm **Posts:** 32

aggelos wrote:

Hi all,

i am having the exact same problem idi had, however in my case i can't set API output mode 2 in my xbees (XBEE-ZB).
After pressing the write button in xctu it informs me that everything went ok, but when i press the read button to
confirm it, AO has the last value.
I have tried various combinations between the coordination and end devices API modes with no success.

Any help would be appreciated.

Cheers

My bad,
i was changing a wrong parameter, everything works fine now.

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7455

aggelos,

Glad to hear that.

Regards.