hi,

I'm trying to save the network ID, channel and network address, but I'm not having success without blaming it saves errors but does not bring the setting.
I tried to visualize the xsc.conf where I believe he should save but there is nothing there beyond the factory setting.

Hello catolica,

We assume you try to configure the changes with the Manager System, right? And afterwards you tried to do it manually, accessing via SSH, rigth?

Wwell, you should be able to do it via Manager System; please explain us what you do and take a snapshoot (with good resolution) once you tried to submit the changes.

Best regards

hi

Yes I tried to configure the SystemManager tab Sensor Networks - XSC.
And by ssh did not move for fear I'm not sure if it was the right place to make more accurate and believe the SystemManager should work.
I would like to know before I post an image, both the network adress id as the network can be changed? If can I like to know the path where the configuration is saved in the system is really xsc.conf meshilium if you could tell me the absolute path of it for me?

Hello,

The path is:
/mnt/lib/var/www/ManagerSystem/plugins/b_SensorData/a0_zigbee/data/your_XBee.conf

But please note this is where Meshlium saves the XBee config, it is not necesarely the actual configuration of the XBee. I mean that if you change this file you will not be changing the XBee configuration.

Let us know what your file contains.

Best regards

Hi

I'm uploading the images for you to visualize the problem;
1.This is the configuration that I want to apply in meshilium:
https://photos-2.dropbox.com/i/l/AvBe5P ... change.JPG

2.This is that it brings after you save the desired setting:
https://photos-1.dropbox.com/i/l/8gm0d2 ... change.JPG

3.This is the configuration file within the meshiulium after saving:
https://photos-3.dropbox.com/i/l/picHoN ... c.conf.JPG

I think he should bring the settings that were saved in the SystemManager but he returns to the default.

Thanks

Hi.

Sorry, the last message the links were not working properly, so I updated with functional links

I'm uploading the images for you to visualize the problem;
1.This is the configuration that I want to apply in meshilium:
http://dl.dropbox.com/u/38438150/Imagen ... change.JPG

2.This is that it brings after you save the desired setting:
http://dl.dropbox.com/u/38438150/Imagen ... change.JPG

3.This is the configuration file within the meshiulium after saving:
http://dl.dropbox.com/u/38438150/Imagen ... c.conf.JPG

I think he should bring the settings that were saved in the SystemManager but he returns to the default.

Thanks

Dear Catolica,

We have seen that you execute the cat and vi commands to see the content of that file xsc.conf.

Please let us know the content of that file.

Also, we saw you did not let and space character between the command cat and the file; it is needed.

Best regards

hi,

I am posting two pictures of the XSC file path:
/mnt/lib/var/www/ManagerSystem/plugins/b_SensorData/a0_zigbee/data/xsc.conf

comand cat:
http://dl.dropbox.com/u/38438150/Imagen ... %20xsc.JPG

and comand vi:
http://dl.dropbox.com/u/38438150/Imagen ... %20xsc.JPG

Thanks.

Hi,
I am waiting for your reply.
I would like to verify the purchase order 2298_11, what types of radios were sent and why Meshilium not work with waspmotes.
Regards,

Dear Catolica,

We have been studying your problem. First when you press the Check Status button in the Manager System does not mean that the configuration is saved. To save the settings you must first press the "Save" button, and then pressing Check Status will be able to check that the configuration has been properly stored.

After checking the settings in the Meshlium is correct, you should check that the configuration of the Waspmotes. For the Meshlium can receive the frames sent by the Waspmote, both must be configured on the same channel. To find the channel through which the transmitted Waspmote can use the X-CTU.

If after these checks, although not reciven data, make screenshots of all configurations (Meshlium and Waspmote) so we can solve the problem.


Best regards