errors

Smart Agriculture · **Joined:** Mon Apr 30, 2012 10:28 am **Posts:** 17

we're having a problem with programming the waspmote. it was working normally but then suddenly it doesn't get programmed and this is the error that we get:
avrdude: verification error, first mismatch at byte 0x0000
0x0c != 0xff
avrdude: verification error; content mismatch
we checked the programming jumper and we tried the reset button, but nothing changed.
could anyone help and tell us what's the problem and how to fix it?

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7472

Hi Smart Agriculture,

One question: if the mote switch is turned on and you press the reset button, does the reset relay blink for a few instants?

Regards.

Smart Agriculture · **Joined:** Mon Apr 30, 2012 10:28 am **Posts:** 17

yes, the green middle led blinks couple of time quickly.

Regards

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7472

Hi Smart Agriculture,

it sounds pretty weird. You are always having the same error, and have no problems with your other Waspmotes?

If so, we will need you to return it back to us so we can check it here in Libelium, please fulfill this form so we can start an RMA process.

http://www.libelium.com/support/technicalservice

Regards.