Does a micros() function exist?

henoc · **Joined:** Wed Jan 12, 2011 4:41 pm **Posts:** 20

Hi
Just wondering if the equivalent of millis() exist for microseconds time delay readings. Otherwise, how would you recommend measuring microseconds delays with Waspmote.
Thanks!

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7514

Hi henoc,

I'm afraid micros() is not implemented in the Waspmote libraries. If you need to set a delay, delayMicroseconds() will work the same as delay, if you need to measure time between two events you'll have to use one of the 16bit timer/counters of the microcontroller.

Regards.