5 pins on Agro Board for SHT75 sensor with 4 pins

michel33 · **Joined:** Mon Jan 16, 2012 6:20 pm **Posts:** 14

Hi dev,

I use my agro pro board and what a surprise :
I have 5 pins on the Agro Board pro

I check the agriculture-sensor-board_eng.pdf :
"Figure 15: Image of the socket for the SHT75 sensor" : only 4 pins appears.

wich I can plug please ?

Thanks
regards

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7515

Hi mchel33,

it is owed to manufacturing, sometimes if 4 pin strips are not available boards are supplied with 5 pin strips, one of them unconnected. Could you please post a picture of your board so we can tell you which of them is the dumb pin?

Regards.

michel33 · **Joined:** Mon Jan 16, 2012 6:20 pm **Posts:** 14

ok : link below

[img]
https://docs.google.com/open?id=0B3430c ... DFjNi1lQkE
[/img]

regards

libelium-dev · **Joined:** Mon Sep 28, 2009 1:06 pm **Posts:** 7515

Hi michel33,

the non-functioning pin is the one on the left, next to the RJ11 connector.

Regards.