- Easy and fast deployment
- Minimum maintenance costs
- Services and network scalability
- Compatible with any Cloud platform
Waspmote Plug & Sense! encapsulated line offers to users:
- Robust waterprood IP65 enclosure.
- Nine models integrating more than 60 sensors.
- Add or change a sensor probe in seconds
- Solar prowered with internal and external panel.
- Radios: Zigbee, 802.15.4, WiFi and 3G/GPRS
- Over the air programming (OTAP)
- Special brackets ready for street lights installation.
- Graphical and intuitive programming interface.
Change sensor probes in just seconds
Sensor probes can be attached easily by just screwing them into the bottom sockets. This allows you to add new sensing capabilities to existing networks in just minutes.
In the same way, sensor probes may be easily replaces in order to ensure the lowest maintenance cost of the sensor network.
External and internal Solar Panel
Battery can be recharged using the internal or external solar panel options.
The external solar panel is mounted on a 45º holder which ensures the maximum performance of each outdoor installation.
For the internal option, the solar panel is embedded on the front of the enclosure, perfect for use where space is a major challenge.
The rechargeable battery has a load of 6600mAh what ensures non stop working time during the weeks where the sunlight is lower.
A non rechargeable battery option of extreme load (26Ah) is also possible for projects where solar panel can not be used.
Waspmote Plug and Sense! counts with holders specially designed for outdoor installations in street-lights and building fronts.
Metal cable ties are provided to easily adjust the node to street light posts.
Installation can be done in minutes as you only need to tie the cables on the enclosure holders and then to the post. Once the node is secured just press the ON button and the node will start automatically to send the data gathered from the sensors to the Gateway.
High Sensitivity and Trasmission Power
There are multiple radio options in order to communicate the sensor nodes with the Gateway. ZigBee and 802.15.4 are used commonly in order to create tree and start topologies. WiFi can be used to connect with any WiFi AP while the 3G/GPRS radio can be used in order to send the sensor data directly to the Cloud without using an intermediate Gateway.
The complete list of the available radios is:
- ZigBee (2.4GHz)
- 802.15.4 (2.4GHz)
- WiFi (2.4GHz)
- RF (868MHz)
- RF (900MHz)
- 3G/GPRS (Quadband: 850/900/1900/2100)
Program in minutes
In order to program the nodes an intuitive graphic interface has been developed. Developers just need to fill a web form in order to obtain the complete source code for the sensor nodes. This means the complete program for an specific application can be generated just in minutes.
Check the Code Generator to see how easy it is.
Data to the Cloud
The Sensor data gathered by the Waspmote Plug & Sense! nodes is sent to the Cloud by Meshlium, the Gateway router specially designed to connect Waspmote sensor networks to the Internet via Ethernet, WiFi and 3G interfaces.
There are some defined configurations of Waspmote Plug & Sense! depending on which sensors are going to be used.
Smart Environment is focused on projects in which air quality wants to be measured.
- Carbon Monoxide (CO)
- Carbon Dioxide (CO2)
- Oxygen (O2)
- Methane (CH4)
- Hydrogen (H2)
- Ammonia (NH3)
- Hydrogen Sulfide (H2S)
- Nitrogen Dioxide (NO2)
- Ozone (O3)
- Hydrocarbons (VOC)
- Pressure atmospheric
Smart Cities is specially designed to cover applications in urban spaces such as the air quality, waste container levels, structural health and noise maps.
- Dust concentration
- Linear displacement of cracks
Smart Parking allows to detect available parking spots by placing the node under the pavement. It works with a magnetic sensor which detects when a vehicle is present or not.
- Magnetic field (3 axis)
Smart Agriculture is designed to perform vineyards monitoring for enhancing wine quality, selective irrigation on golf courses and conditions control in greenhouses among others.
- Soil moisture
- Soil temperature
- Leaf wetness
- Solar radiation
- Atmospheric pressure
- Stem diameter
- Wind vane
- Ambient temperature
Smart Security is focused on the detection of perimeter intrusions and on events such as water presence and door and window openings.
- Hall effect
- Water presence
- Liquid level
- Liquid flow
Ambient Control allows to you to create basic environment parameters monitoring using the temperature, humidity and luminosity sensors. As well as this, movement and vibrations can be measured by the internal accelerometer.
- Luminosity (LDR)
- Luminosity (Luxes Accuracy) for Smart Lighting
Radiation Control is designed to measure the radioactivity levels. It includes a Geiger sensor which detects gamma and beta particles.
- Geiger tube [ ß, γ ] (Beta and Gamma)
Smart metering allows to perform electricity measurements and control tank levels.
- Liquid level
- Liquid flow
The new Waspmote Plug & Sense! line allows developers to forget about electronics and focus on services and applications. Now you can deploy wireless sensor networks in a easy and scalable way ensuring minimum maintenance costs. The new platform consists of a robust waterproof enclosure with specific external sockets to connect the sensors, the solar panel, the antenna and even the USB cable in order to reprogram the node. It has been specially designed to be scalable, easy to deploy and maintain.
Fill the buy form to obtain more information about Waspmote Plug & Sense! products or request a personal quote.