Loading a new program to SquidBee

From SquidBee

To load a new program to SquidBee is very easy, you need:

• A SquidBee
• Arduino IDE software (you can download here http://arduino.cc/en/Main/Software)
• SquidBee code

The steps are:

1. Run Arduino IDE
2. Open the SquidBee code or your new code
3. Take the XBee chip out from SquidBee
4. Compile the program
5. Upload the program to SquidBee

If everything is right, you'll have your SquidBee running with the new program.