Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

Examples:

Communication / Sigfox

» Sigfox 02: Send data string

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how to send a Sigfox packet. In this example, the message to be sent is defined as a string. This string defines the diferente HEX values of the bytes to be sent

» Sigfox 03: Send data array

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how to send a Sigfox packet. In this example, the message to be sent is defined as an array of bytes. It is necessary to indicate the length of this array.

» Sigfox 04: Send string with ACK

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how to send a Sigfox packet waiting for a ACK (acknowledgement) to arrive. In this example, the message to be sent is defined as a string. This string defines the diferente HEX values of the bytes to be sent

» Sigfox 05: Send array with ACK

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how to send a Sigfox packet waiting for a ACK (acknowledgement) to arrive. In this example, the message to be sent is defined as an array of bytes. It is necessary to indicate the length of this array.

» Sigfox 08: Sigfox TX test

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how perform a Sigfox TX test.

The possible settings are:

--> count = 0..65535: Count of SIGFOX test RF messages

--> period = 1..255 Period in seconds between SIGFOX test RF messages

--> channel = 0 to 180 or 220 to 400 or -1 (random channel)

» Sigfox P2P 01: Configure module

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how to configure the module for P2P operation. This example shows how to set/get:
- LAN address
- LAN mask
- LAN frequency channel
- LAN power level

» Sigfox P2P 06: LAN to Sigfox GW

Last edition: Jan 10th, 2017 | Categories: Communication, Sigfox

This example shows how to receive multiple packets from a LAN network. Then all packets received are sent to the Sigfox network. Thus, this node will act as gateway from a LAN network to the Sigfox infrastructure