Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

Examples:

Sensors / Smart Metering v20

» SM 01: Temperature Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the temperature sensor read every second approximately, printing the result through the USB port.

» SM 02: Humidity Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the humidity sensor read every sixteen seconds approximately, printing the result through the USB port.

» SM 03: LDR Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the luminosity sensor read every second approximately, printing the result through the USB port.

» SM 04: Current Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on. The current sensor is then read approximately every three seconds, printing results through the USB port.

» SM 05: Flow Sensor on 3V3 Socket Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the flow sensor, placed on socket 5, read every second approximately, printing the result through the USB port.

» SM 06: Flow Sensor on 5V Socket Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the flow sensor, placed on socket 4, read every second approximately, printing the result through the USB port.

» SM 07: Ultrasound Sensor on 3V3 Socket Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the ultrasound sensor, placed on socket 3, read every second approximately, printing the result through the USB port.

» SM 08: Ultrasound Sensor on 5V Socket Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and the ultrasound sensor, placed on socket 2, read every second approximately, printing the result through the USB port.

» SM 11: 5V Load Cell Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on, the load cell placed on socket 9 powered at 5V and read approximately every six seconds, printing results through the USB port.

» SM 12: 10V Load Cell Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on, the load cell placed on socket 9 powered at 10V, read approximately every six seconds, printing results through the USB port.

» SM 13: Reading DS18B20 Temperature

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Metering v20

In this example the Smart Metering sensor board is turned on and configured to read the temperature sensor on it once every second.