Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» GPRS+GPS Networking Guide

This guide shows how to use the GPRS+GPS module. The 3G+GPS and GPRS+GPS modules for Waspmote and Plug & Sense! allow to easily perform realtime tracking applications. The idea is simple: read the GPS coordinates (longitude and latitude) and send them by using a HTTP request to a web server along with extra information from the sensors included in the node. Then use a browser to load the PHP webpage which uses Googlemaps to show the location in realtime.