Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» 802 15: Set/Read Power Level

This program shows how to set and read the power mode at which the XBee module transmits at. Parameter Range: 0 - 4(default)

Required Materials

1 x Waspmote PRO
1 x Battery
1 x MiniUSB wire
1 x XBee-802.15.4 module

Notes

Parameter Range: 0 - 4(default)

Parameter XBee XBee-PRO
0 -10dBm 10dBm
1 -6dBm 12dBm
2 -4dBm 14dBm
3 -2dBm 16dBm
4 0dBm 18dBm

REMARKS: Check your country's Restrictions

- The battery has to be connected.
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------   [802_14] - set/get the power level     -------- 
 *  
 *  Explanation: This program shows how to set and read the power mode
 *  at which the XBee module transmits at. Parameter Range: 0 - 4(default)
 *
 *  Parameter   XBee    XBee-PRO
 *      0      -10dBm    10dBm
 *      1      -6dBm     12dBm
 *      2      -4dBm     14dBm
 *      3      -2dBm     16dBm
 *      4       0dBm     18dBm
 *
 *  REMARKS: Check your country's Restrictions
 *
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           3.0 
 *  Design:            David Gascón 
 *  Implementation:    Yuri Carmona
 */
 
 #include <WaspXBee802.h>

// Define the power level value
////////////////////////////////////////////////
uint8_t powerValue=4;
////////////////////////////////////////////////

void setup()
{ 
  // Init USB port
  USB.ON();
  USB.println(F("802_15 example\n")); 
  USB.println(F("----------------------------------"));
  USB.println(F("\tPOWER LEVEL"));
  USB.println(F("----------------------------------\n"
               "  Parameter   XBee    XBee-PRO\n"
               "----------------------------------\n"
               "      0      -10dBm    10dBm\n"
               "      1      -6dBm     12dBm\n"
               "      2      -4dBm     14dBm\n"
               "      3      -2dBm     16dBm\n"
               "      4       0dBm     18dBm\n"
               "----------------------------------"));

  delay(1000);
  
  // init XBee
  xbee802.ON();
  
  // get the Power Level
  xbee802.getPowerLevel();
  
  USB.print(F("Current Power Level:"));
  USB.println(xbee802.powerLevel, DEC);
  USB.println();
  delay(1000);
  
}

void loop()
{   
  
  // 1. set the Power Level to powerValue
  USB.print(F("Set the Power Level to "));
  USB.println(powerValue, DEC);
  xbee802.setPowerLevel(powerValue);
  
    
  // 2. get the Power Level
  USB.print(F("Read the Power Level:"));
  xbee802.getPowerLevel();
  USB.println(xbee802.powerLevel, DEC);
  USB.println();
  delay(1000);
  
  // 3. write actual value to module
  USB.println(F("Write actual value to module"));
  xbee802.writeValues();
  
  USB.println(F("******************************"));
  delay(10000);
  
}

Output

H#
802_15 example

----------------------------------
POWER LEVEL
----------------------------------
Parameter XBee XBee-PRO
----------------------------------
0 -10dBm 10dBm
1 -6dBm 12dBm
2 -4dBm 14dBm
3 -2dBm 16dBm
4 0dBm 18dBm
----------------------------------
Current Power Level:4

Set the Power Level to 4
Read the Power Level:4

Write actual value to module
******************************
...

Quick Publish: