Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» 900 05: Get RSSI

This program shows how to get RSSI value from the last received packet. For this protocol, there is an API function which shows this information. Before running this example, make sure there is another emitter sending packets to this XBee module in order to receive information.

Required Materials

1 x Waspmote PRO
1 x Battery
1 x MiniUSB wire
1 x XBee-900

Notes

* The should be a emitter Waspmote in order to receive information

Code

/*  
 *  ------ [900_05] - get RSSI from last received packet  -------- 
 *  
 *  Explanation: This program shows how to get RSSI value from the 
 *  last received packet. For this protocol, there is an API function which
 *  shows this information. Before running this example, make sure there 
 *  is another emitter sending packets to this XBee module in order to 
 *  receive information.
 *
 *  Copyright (C) 2015 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           0.2
 *  Design:            David Gascón 
 *  Implementation:    Yuri Carmona
 */

#include <WaspXBee900.h>

// define variable
uint8_t error;

// variable to store RSSI
int rssi;


void setup()
{  
  // init USB port
  USB.ON();
  USB.println(F("Get RSSI example"));

  // init XBee 
  xbee900.ON(); 

}



void loop()
{ 
  // receive XBee packet (wait for 10 seconds)
  error = xbee900.receivePacketTimeout( 10000 );

  // check answer  
  if( error == 0 ) 
  {
    // Show data stored in '_payload' buffer indicated by '_length'
    USB.print(F("Data: "));  
    USB.println( xbee900._payload, xbee900._length);

    // Show data stored in '_payload' buffer indicated by '_length'
    USB.print(F("Length: "));  
    USB.println( xbee900._length,DEC);

    // Getting RSSI using the API function
    // This function returns the last received packet's RSSI
    xbee900.getRSSI();

    // check AT flag  
    if( xbee900.error_AT == 0 )
    {      
      USB.print(F("getRSSI(dBm): ")); 

      //get rssi from getRSSI function and make conversion
      rssi = xbee900.valueRSSI[0];
      rssi *= -1;  
      USB.println(rssi,DEC);
    }
    USB.println();
  }
  else
  {
    // Print error message:
    /*
     * '7' : Buffer full. Not enough memory space
     * '6' : Error escaping character within payload bytes
     * '5' : Error escaping character in checksum byte
     * '4' : Checksum is not correct	  
     * '3' : Checksum byte is not available	
     * '2' : Frame Type is not valid
     * '1' : Timeout when receiving answer   
     */
    USB.print(F("Error receiving a packet:"));
    USB.println(error,DEC);     
  }
}

Output

E#
Get RSSI example
Data: <=>€#387245265#node_01#1#STR:new_sensor_frame#BAT:34#
Length: 54
getRSSI(dBm): -97

Data: <=>€#387245265#node_01#2#STR:new_sensor_frame#BAT:34#
Length: 54
getRSSI(dBm): -100
...

Quick Publish: