Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

Examples:

Combined / Data In / Data Out

» C 12: Sending Bluetooth inquiries via WIFI ftp

Last edition: Jan 10th, 2017 | Categories: Combined, Data In / Data Out

This example uses bluetooth module (SOCKET1) to scan network till find two devices and then, a file is sent via WIFI module (SOCKET0 and ftp mode) containing the Bluetooth scan.

» C 17: Sending ZigBee data via WIFI UDP

Last edition: Jan 10th, 2017 | Categories: Combined, Data In / Data Out

This code receives packets via XBee ZigBee plugged on socket 0 (during 20s). Then, the surce address of the received packet is parsed and sent using WIFI module via UDP plugged on socket 1.

» C 18: Sending Digimesh values via GPRS UDP

Last edition: Jan 10th, 2017 | Categories: Combined, Data In / Data Out

This code receives packets via XBee Digimesh plugged on socket 0 (during 20s). Then, the surce address of the received packet is parsed and sent using GPRS module via UDP plugged on socket 1.

» C 19: Sending 802.15.4 values via bluetooth

Last edition: Jan 10th, 2017 | Categories: Combined, Data In / Data Out

This code receives packets via XBee 802.15.4 plugged on socket 0 (during 20s). Then, the surce address of the received packet is parsed and sent using bluetooth module plugged on socket 1.