Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

Examples:

Sensors / GPS module

» GPS 01: Getting basic data

Last edition: Nov 13th, 2017 | Categories: Sensors, GPS module

This example shows how to set the GPS module ON. Wait until it is connected to the satellites. Then the information is requested. Finally, a conversion to degrees is done in order to search positions in Internet GPS websites.

» GPS 02: Using ephemeris

Last edition: Nov 13th, 2017 | Categories: Sensors, GPS module

Set GPS module ON. Wait until it is connected to the satellites. Then ephemeris are requested and stored in SD card. Secondly, ephemeris are loaded to the GPS module from the SD card

» GPS 03: Ephemeris improvement

Last edition: Nov 13th, 2017 | Categories: Sensors, GPS module

This example shows the different time for connecting to satellites using ephemeris. Firstly, time elapsed is measured until GPS module is connected to satellites. Secondly, ephemeris are stored and loaded to the GPS module, and then time to connection is measured again to be compared with the first one.

» GPS 04: Complete example

Last edition: Nov 13th, 2017 | Categories: Sensors, GPS module

This example shows how to use the different functions of the Waspmote GPS API. Basic data is requested using specific functions for each parameter. Finally, ephemeris are used in order to connect easily to satellites.

» GPS 05: XBeeDM send

Last edition: Jan 10th, 2017 | Categories: Sensors, GPS module

Set GPS module ON. Wait until it is connected to the satellites. Depending on the connectivity, a frame with GPS info or error message is prepared and sent via XBee-PRO DigiMesh module in broadcast mode.

» GPS 06: Waspmote tracker

Last edition: Nov 13th, 2017 | Categories: Sensors, GPS module

This example creates a KML file for Google Earth tracking. When the GPS module connects to satellites, Waspmote starts appending data to the KML file. When writing the SD file, the red LED lets the user know that Waspmote shouldn't be switched off.