Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

Examples:

Sensors / Smart Cities Board v20

» SC 01: Temperature Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the temperature sensor read every second approximately, printing the result through the USB port.

» SC 02: Humidity Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the humidity sensor read every second approximately, printing the result through the USB port.

» SC 03: LDR Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the luminosity sensor read every second approximately, printing the result through the USB port.

» SC 04: Dust Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the dust sensor read every three seconds approximately, printing the result through the USB port.

» SC 05: Crack Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the crack sensor read every three seconds approximately, printing the result through the USB port.

» SC 06: Crack Propagation Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the crack propagation sensor read every second approximately, printingthe measured value through the USB port.

» SC 07: Crack Detection Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the crack detection sensor read every second approximately, printing a message through the USB port if a crack has been detected.

» SC 08: Ultrasound Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and the ultrasound sensor read every three seconds approximately, printing the result through the USB port.

» SC 09: Audio Sensor Reading

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and theaudio sensor read every three seconds approximately, printing the value measured through the USB port.

» SC 10: Reading DS18B20 Temperature

Last edition: Jan 10th, 2017 | Categories: Sensors, Smart Cities Board v20

In this example the Smart Cities sensor board is turned on and configured to read the temperature sensor on it once every second.