Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» BLE 14 Managing WhiteList

This example show how to manage users inside the whitelist of the BLE module,

Required Materials

1 x Waspmote
1 x Battery
1 x Bluetooth Low Energy module
1 x Bluetooth module antenna
1 x Expansion board (if socket 1 is used)
1 x SD card

Notes

- Socket 0 is used by default
- EEPROM is used in this example by default.
- Never unplug module while Waspmote is turned ON.
- Bluetooth module antenna should be connected.
- The battery must be connected in ANY example.
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------------------ [BLE_14] - managing whitelist ------------------- 
 *
 *  Explanation: This example show how to manage users inside the
 *  whitelist of the BLE module,
 *
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 3 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS ARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 *  Version:		1.0
 *  Design:			David Gascón
 *  Implementation:	Javier Siscart
 */

#include <WaspBLE.h>

// Aux variable
uint16_t aux = 0;

// MAC address of a BLE module
char BleMacAddress[13] = "001122334455";

void setup() 
{  
  USB.println(F("BLE_14 Example"));  

  // 0. Turn BLE module ON
  BLE.ON(SOCKET0);

}

void loop() 
{

  // 1. Add new member. 
  aux = BLE.whiteListAppend(BleMacAddress);
  if (aux == 0)
  {
    USB.print(BleMacAddress);
    USB.println(" member added");
  }
  else
  {
    USB.println(F(" Append failed"));
  }

  // 2. Remove new member
  aux = BLE.whiteListRemove(BleMacAddress);
  if (aux == 0)
  {
    USB.print(BleMacAddress);
    USB.println(" member removed");
  }
  else
  {
    USB.println(F(" Remove failed"));
  }

  // 3. add new member
  aux = BLE.whiteListAppend(BleMacAddress);
  if (aux == 0)
  {
    USB.print(BleMacAddress);
    USB.println(" member added");
  }
  else
  {
    USB.println(F(" Append failed"));
  }

  // 4. clear all members
  if (BLE.whiteListClear() == 1)
  {
    USB.println(F("Whitelist is empty"));
  }
  else
  {
    USB.println(F("clear failed"));
  }

  USB.println();
  delay(10000);


  /* NOTE 1: Do not use this command while advertising, scanning, 
   or while being connected. The current list is discarded upon 
   reset or power-cycle.
   */

  /* NOTE 2: There is no function to show the current members of 
   the whitelist.
   */

}

Output

H#
BLE_14 Example
member 001122334455 added
member 001122334455 removed
member 001122334455 added
Whitelist is empty

Quick Publish: