Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» DM 14: Set time from Meshlium

This program shows how to set RTC time from Meshlium settings

Required Materials

1 x Waspmote
1 x Battery
1 x MiniUSB wire
1 x XBee-Digimesh module

Notes

- The battery has to be connected.
- This example can be executed in Waspmote v12

Code

/*  
 *  ------ [DM_14] - send packets  -------- 
 *  
 *  Explanation: This program shows how to set RTC time from Meshlium
 *  settings
 *  
 *  Copyright (C) 2015 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           0.1
 *  Design:            David Gascón 
 *  Implementation:    Yuri Carmona
 */
 
#include <WaspXBeeDM.h>

// Destination MAC address
//////////////////////////////////////////
char MESHLIUM_ADDRESS[] = "0013A2004098FB30"; 
//////////////////////////////////////////

// define variable
uint8_t error;



void setup()
{
  // init USB port
  USB.ON();
  USB.println(F("Setting RTC time from Meshlium settings"));
  
  // init RTC  
  RTC.ON();
  
  // init XBee
  xbeeDM.ON();
  
}


void loop()
{    
  // set RTC time
  error = xbeeDM.setRTCfromMeshlium(MESHLIUM_ADDRESS);
      
  // check flag
  if( error == 0 )
  {
    USB.print(F("SET RTC ok. "));
  }
  else 
  {
    USB.print(F("SET RTC error. "));
  }  
  
  USB.print(F("RTC Time:"));
  USB.println(RTC.getTime());
  
  delay(5000);
}

Output

H#
Setting RTC time from Meshlium settings
SET RTC ok. RTC Time:Tue, 16/10/18, 10:32:08

Quick Publish: