Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Frame 01: ASCII simple

This example creates an ASCII frame with simple data (only one field per sensor value) and shows it.

Required Materials

1 x Waspmote
1 x Battery
1 x MiniUSB wire

Notes

This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ FRAME_01_ascii_simple - WaspFrame Ascii simple -------- 
 *  
 *  Explanation: This example Creates a simple ASCII frame and shows it. 
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           3.0
 *  Design:            David Gascón 
 *  Implementation:    Joaquín Ruiz, Yuri Carmona
 */ 
 
#include <WaspFrame.h>
  
// define the Waspmote ID 
char moteID[] = "node_01";


void setup()
{
  // Init USB port & RTC
  USB.ON();
  USB.println(F("Start program"));
    
  // set the Waspmote ID
  frame.setID(moteID);  
}

void loop()
{
  USB.println(F("Creating an ASCII frame"));

  // Create new frame (ASCII)
  frame.createFrame(ASCII); 

  // set frame fields (String - char*)
  frame.addSensor(SENSOR_STR, "this_is_a_string");
  // set frame fields (Battery sensor - uint8_t)
  frame.addSensor(SENSOR_BAT, PWR.getBatteryLevel());

  // Prints frame
  frame.showFrame();
  
  // Wait for five seconds
  delay(5000);
  
}

Output

H#
Start program
Creating an ASCII frame
===============================
Current ASCII Frame:
Length: 61
Frame Type: 134
frame (HEX): 3C3D3E86022334443343373036334439333734324634236E6F64655F30312330235354523A746869735F69735F615F737472696E67234241543A393623
frame (STR): <=>�#4D3C7063D93742F4#node_01#0#STR:this_is_a_string#BAT:96#
===============================

Quick Publish: