Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» GPRS 23: Lost call with hibernate

This example shows how make Hibernate with Waspmote_PRO and GPRS_Pro. Waspmote does a lost call when wakes up

Required Materials

1 x Waspmote
1 x Battery
1 x GPRS_Pro module
1 x GPRS/3G antenna
1 x SIM card

Notes

- GPRS_Pro module must be powered with a battery
- When GPRS_Pro is in use, interrupts can't be used
- When RTC wakes up the Waspmote, the alarm flag must be cleared
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------  GPRS_23 - Lost call with hibernate  -------- 
 *  
 *  Explanation: This example shows how make Hibernate with Waspmote_PRO and 
 *  GPRS_Pro. Waspmote does a lost call when wakes up.
 *  
 *  Copyright (C) 2014 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           0.4
 *  Design:            David Gascón 
 *  Implementation:    Alejandro Gállego
 */

#include "WaspGPRS_Pro.h"

int answer;

void setup() 
{ 
    // 1. checks if we come from a normal reset or an hibernate reset 
    PWR.ifHibernate(); 

} 

void loop() 
{ 
    // 2. if Hibernate has been captured, execute the associated function 
    if( intFlag & HIB_INT ) 
    { 
        Utils.blinkLEDs(1000);	 
        Utils.blinkLEDs(1000);  
        intFlag &= ~(HIB_INT); 

        USB.ON();
        USB.println("USB started");

        // 3. clears the RTC alarm flag to allow the connection with the GPRS_Pro
        RTC.ON();
        RTC.clearAlarmFlag();
        RTC.OFF();

        // 4. activates the GPRS_Pro module:
        answer = GPRS_Pro.ON(); 
        if ((answer == 1) || (answer == -3))
        {
            USB.println("GPRS_Pro module ready..."); 

            // 5. sets pin code:
            USB.println(F("Setting PIN code..."));
            // **** must be substituted by the SIM code
            if (GPRS_Pro.setPIN("****") == 1) 
            {
                USB.println(F("PIN code accepted"));
            }
            else
            {
                USB.println(F("PIN code incorrect"));
            }

            // 6. waits for connection to the network:
            answer = GPRS_Pro.check(180);    
            if (answer == 1)
            {
                USB.println("GPRS_Pro connected to the network"); 

                // 7. makes a lost call
                GPRS_Pro.makeLostCall("*********", 15);
            }
            else
            {
                USB.println(F("GPRS_Pro module cannot connect to the network"));     
            }
        }
        else
        {
            USB.println(F("GPRS_Pro module not ready"));    
        }

        // 8. powers off the GPRS_Pro
        GPRS_Pro.OFF(); 
    } 

    // 9. set Waspmote to Hibernate, waking up after 30 seconds 
    PWR.hibernate("00:00:00:30",RTC_OFFSET,RTC_ALM1_MODE2); 
} 

Output

H#
USB started
GPRS_Pro module ready...
Setting PIN code...
PIN code accepted
GPRS_Pro module connected to the network...

Quick Publish: