Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Int 05b: Agriculture interrupt

This example shows how to setup the pluviometer interruption

Required Materials

1 x Waspmote
1 x MiniUSB wire
1 x Battery
1 x Agriculture Board
1 x Pluviometer Sensor

Notes

- This example shows how to setup the pluviometer interruption
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------ [INT_05b] Pluviometer interrupt example -------- 
 *
 *  Explanation: This example shows how to setup the pluviometer 
 *  interruption 
 *
 *  Copyright (C) 2013 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *
 *  Version:                0.1
 *  Design:                 David Gascon
 *  Implementation:         Yuri Carmona
 */


// Inclusion of the Agriculture Sensor Board v20 library
#include <WaspSensorAgr_v20.h>




void setup()
{
  USB.ON();
  USB.println(F("INT_05b example"));

  // Turn on the sensor board 
  SensorAgrv20.ON();  
}



void loop()
{
  ///////////////////////////////////////////////////////////////////////
  // 1. Enable interruption: pluviometer sensor
  ///////////////////////////////////////////////////////////////////////
  SensorAgrv20.attachPluvioInt();


  ///////////////////////////////////////////////////////////////////////
  // 2. Set low-power consumption state
  //////////////////////////////////////////////////////////////////////
  // Sensor board power supply is kept. Note that input arguments for 
  // sleep function are: SOCKET0_OFF | SOCKET1_OFF. But SENS_OFF has 
  // been omitted so as to keep the Board powered on
  USB.println(F("Enter sleep mode..."));  
  SensorAgrv20.sleepAgr("00:00:00:30", RTC_OFFSET, RTC_ALM1_MODE3, SOCKET0_OFF | SOCKET1_OFF, SENS_AGR_PLUVIOMETER);

  // Interruption event happened

  ///////////////////////////////////////////////////////////////////////
  // 3. Disable interruption: from the board 
  //    This is done to avoid new interruptions
  ///////////////////////////////////////////////////////////////////////
  SensorAgrv20.detachPluvioInt();  

  USB.ON();
  USB.println(F("Waspmote wakes up"));


  ///////////////////////////////////////////////////////////////////////
  // 4. Check the interruption source
  ///////////////////////////////////////////////////////////////////////
  
  // check Pluviometer interruption
  if( intFlag & PLV_INT )
  { 
    // print info
    USB.ON();
    USB.println(F("++++++++++++++++++++++++++++++++++"));
    USB.println(F("++ PLV interruption captured!! ++"));
    USB.println(F("++++++++++++++++++++++++++++++++++")); 

    // blink LEDs
    for(int i=0; i<10; i++)
    {
      Utils.blinkLEDs(50);
    }

    /* 
     *  Insert your code here if more things needed
     */
  } 
  
  // check RTC interruption
  if( intFlag & RTC_INT )
  { 
    // print info
    USB.ON();
    USB.println(F("++++++++++++++++++++++++++++++++++"));
    USB.println(F("++ RTC interruption captured!! ++"));
    USB.println(F("++++++++++++++++++++++++++++++++++")); 
  }
  
  ///////////////////////////////////////////////////////////////////////
  // 5. Clear 'intFlag' 
  ///////////////////////////////////////////////////////////////////////
  // This is mandatory, if not this interruption will not be deleted and 
  // Waspmote could think in the future that a not existing interruption arrived
  clearIntFlag(); 

  ///////////////////////////////////////////////////////////////////////
  // 6. Clear interruption pin   
  ///////////////////////////////////////////////////////////////////////
  // This function is used to make sure the interruption pin is cleared
  // if a non-captured interruption has been produced
  PWR.clearInterruptionPin();

}


Output

E#
INT_05b example
Enter sleep mode...
Waspmote wakes up
++++++++++++++++++++++++++++++++++
++ PLV interruption captured!! ++
++++++++++++++++++++++++++++++++++
Enter sleep mode...
Waspmote wakes up
++++++++++++++++++++++++++++++++++
++ PLV interruption captured!! ++
++++++++++++++++++++++++++++++++++
Enter sleep mode...
Waspmote wakes up
++++++++++++++++++++++++++++++++++
++ PLV interruption captured!! ++
++++++++++++++++++++++++++++++++++
Enter sleep mode...


....

Quick Publish: