Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Sigfox P2P 03: RX single packet

This example shows how to receive single packets

Required Materials

1 x Waspmote
1 x Battery
1 x Sigfox 868 module
1 x 868 MHz antenna

Notes

- This code is part of a two-Waspmote communication. This is the receiving side. So, in order to establish communication, please set up a sending node
- This example can be executed in Waspmote v12 and Waspmote v15
- This example only works with Sigfox 868 module

Code

/*  
 *  ------ Sigfox P2P Code Example -------- 
 *  
 *  Explanation: This example shows how to receive single packets
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify  
 *  it under the terms of the GNU General Public License as published by  
 *  the Free Software Foundation, either version 3 of the License, or  
 *  (at your option) any later version.  
 *   
 *  This program is distributed in the hope that it will be useful,  
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of  
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the  
 *  GNU General Public License for more details.  
 *   
 *  You should have received a copy of the GNU General Public License  
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.  
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona    
 */

#include <WaspSigfox.h>

//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////

// ADDRESS: Define the LAN network address. 
// Range: From 0x000000 to 0xFFFFFF. 
// Default: 0x000000
//////////////////////////////////////////////
uint32_t address   = 0x000001;
//////////////////////////////////////////////

uint8_t error;



void setup() 
{
  USB.ON();  

  //////////////////////////////////////////////
  // switch on
  //////////////////////////////////////////////
  error = Sigfox.ON(socket);

  // Check status
  if( error == 0 ) 
  {
    USB.println(F("Switch ON OK"));     
  }
  else 
  {
    USB.println(F("Switch ON ERROR")); 
  } 


  //////////////////////////////////////////////
  // Set LAN address
  //////////////////////////////////////////////
  error = Sigfox.setAddressLAN(address);

  // Check status
  if( error == 0 ) 
  {
    USB.println(F("Set LAN Address OK"));   
  }
  else 
  {
    USB.println(F("Set LAN Address ERROR")); 
  } 

  USB.println();
}



void loop()
{
  // Receive data
  USB.println(F("Waiting for data..."));   

  error = Sigfox.receive(10);

  if (error == 0) 
  {
    USB.println(F("Packet received: "));
    USB.println(Sigfox._packet);
  }
  else
  {
    USB.println(F("Packet not received (timeout)"));  
  }


  USB.println();
}

Output

H#
Switch ON OK
Set LAN Address OK

Waiting for data...
Packet received:
0000000000000000000000000000000001

Waiting for data...
Packet received:
0000000000000000000000000000000002

Waiting for data...
Packet received:
0000000000000000000000000000000003

Waiting for data...
Packet received:
0000000000000000000000000000000004
...

Quick Publish: