Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Power 05: I/O power supply

This example shows how to set up the power supply lines in the Waspmote I/O sockets

Required Materials

1 x Waspmote
1 x MiniUSB wire
1 x Battery

Notes

This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------ [PWR_5] - I/O Power Supply management -------- 
 *
 *  Explanation: This example shows how to set up the power supply lines
 *  in the Waspmote I/O sockets
 *
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona
 */
 
 
void setup()
{
  USB.ON();
  USB.println(F("PWR_5 example"));
}

void loop()
{ 
  ///////////////////////////////////////////////////////
  // 1. switch on
  ///////////////////////////////////////////////////////
  USB.println(F("Switch on power supply lines"));  
  
  PWR.setSensorPower(SENS_3V3, SENS_ON);
  PWR.setSensorPower(SENS_5V, SENS_ON);
  
  // delay 10 secs
  delay(10000);
  
  
  ///////////////////////////////////////////////////////  
  // 2. switch off
  ///////////////////////////////////////////////////////
  USB.println(F("Switch off power supply lines"));  
  
  PWR.setSensorPower(SENS_3V3, SENS_OFF);
  PWR.setSensorPower(SENS_5V, SENS_OFF);
  // delay 10 secs
  delay(10000);
}

Output

H#
PWR_5 example
Switch on power supply lines
Switch off power supply lines
Switch on power supply lines
Switch off power supply lines

Quick Publish: