Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» RTC 03: RTC temperature

This example shows how to read the temperature of the Waspmote RTC, using its temperature sensor.

Required Materials

1 x Waspmote
1 x MiniUSB wire
1 x Battery

Notes

This example can be executed in Waspmote v12

Code

/*  
 *  ------ [RTC_1] Reading RTC temperature example -------- 
 *  
 *  Explanation: This example shows how to read the temperature of the 
 *  Waspmote RTC, using its temperature sensor
 *  
 *  Copyright (C) 2012 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           0.1 
 *  Design:            David Gascón 
 *  Implementation:    Marcos Yarza
 */

void setup(){
  
  // Open the USB connection
  USB.ON();
  USB.println(F("RTC_3 example"));

  // Powers RTC up, init I2C bus and read initial values
  USB.println(F("Init RTC"));
  RTC.ON();
}

void loop(){

  // Getting Temperature
  USB.print(F("Temperature: "));
  USB.println(RTC.getTemperature(),DEC);
    
  delay(5000);
  
  
}

Output

E#
RTC_3 example
Init RTC
Temperature: 25

Quick Publish: