Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Sigfox 06: Send keep-alive

This example shows how to send a Keep-Alive packet to the Sigfox network

Required Materials

1 x Waspmote
1 x Battery
1 x Sigfox 868 or Sigfox 900 module
1 x 868/900 MHz antenna

Notes

- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ Sigfox Code Example -------- 
 *  
 *  Explanation: This example shows how to send a Keep-Alive packet
 *  to the Sigfox network
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify  
 *  it under the terms of the GNU General Public License as published by  
 *  the Free Software Foundation, either version 3 of the License, or  
 *  (at your option) any later version.  
 *   
 *  This program is distributed in the hope that it will be useful,  
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of  
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the  
 *  GNU General Public License for more details.  
 *   
 *  You should have received a copy of the GNU General Public License  
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona
 */
#include <WaspSigfox.h>

//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////

uint8_t error;


void setup() 
{
  USB.ON();  
  
  
  //////////////////////////////////////////////
  // switch on
  //////////////////////////////////////////////
  error = Sigfox.ON(socket);
  
  // Check sending status
  if( error == 0 ) 
  {
    USB.println(F("Switch ON OK"));     
  }
  else 
  {
    USB.println(F("Switch ON ERROR")); 
  }    
  
  
  //////////////////////////////////////////////
  // Send Keep-Alive packet
  //////////////////////////////////////////////
  Sigfox.sendKeepAlive();
   
  // Check sending status
  if( error == 0 ) 
  {
    USB.println(F("Send Keep-Alive: OK"));
  }
  else 
  {
    USB.println(F("Send Keep-Alive: ERROR"));
  }       
  
  USB.println(F("----------------------------------------------"));

}


void loop() 
{

  delay(10000);
}

Output

H#
Switch ON OK
Send Keep-Alive: OK
----------------------------------------------

Quick Publish: