Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Sigfox 07: Set/get power level

This example shows how to set/get the power level

Required Materials

1 x Waspmote
1 x Battery
1 x Sigfox 868 or Sigfox 900 module
1 x 868/900 MHz antenna

Notes

- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ Sigfox Code Example -------- 
 *  
 *  Explanation: This example shows how to set/get the power level
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify  
 *  it under the terms of the GNU General Public License as published by  
 *  the Free Software Foundation, either version 3 of the License, or  
 *  (at your option) any later version.  
 *   
 *  This program is distributed in the hope that it will be useful,  
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of  
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the  
 *  GNU General Public License for more details.  
 *   
 *  You should have received a copy of the GNU General Public License  
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.  
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona  
 */
#include <WaspSigfox.h>

//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////

uint8_t error;


void setup() 
{
  USB.ON();  
  
  //////////////////////////////////////////////
  // switch on
  //////////////////////////////////////////////
  error = Sigfox.ON(socket);
  
  // Check status
  if( error == 0 ) 
  {
    USB.println(F("Switch ON OK"));     
  }
  else 
  {
    USB.println(F("Switch ON ERROR")); 
  } 
  
  USB.println();
}



void loop() 
{
  //////////////////////////////////////////////
  // show Firmware data
  //////////////////////////////////////////////
  error = Sigfox.setPower(14);
    
  // Check status
  if( error == 0 ) 
  {
    USB.println(F("Power Level set OK"));    
  }
  else 
  {
    USB.println(F("Power Level set ERROR"));  
  } 
  
  
  //////////////////////////////////////////////
  // show Firmware data
  //////////////////////////////////////////////
  error = Sigfox.getPower();
    
  // Check status
  if( error == 0 ) 
  {
    USB.println(F("Power Level get OK"));     ;
    
    USB.print(F("Power Level: "));
    USB.println(Sigfox._power,DEC);
  }
  else 
  {
    USB.println(F("Power Level get ERROR"));  
  } 
 
  USB.println(F("-------------------------------")); 
  
  delay(5000);
}

Output

H#
Switch ON OK

Power Level set OK
Power Level get OK
Power Level: 14
-------------------------------
Power Level set OK
Power Level get OK
Power Level: 14
-------------------------------
...

Quick Publish: