Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Sigfox 08: Sigfox TX test

This example shows how perform a Sigfox TX test.

The possible settings are:

--> count = 0..65535: Count of SIGFOX test RF messages

--> period = 1..255 Period in seconds between SIGFOX test RF messages

--> channel = 0 to 180 or 220 to 400 or -1 (random channel)

Required Materials

1 x Waspmote
1 x Battery
1 x Sigfox 868 or Sigfox 900 module
1 x 868/900 MHz antenna

Notes

- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*  
 *  ------ Sigfox Code Example -------- 
 *  
 *  Explanation: This example shows how perform a Sigfox TX test.
 *  The possible settings are:
 *    count = 0..65535: Count of SIGFOX test RF messages
 *    period = 1..255 Period in seconds between SIGFOX test RF messages
 *    channel = 0 to 180 or 220 to 400 or -1 (random channel) 
 *  
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify  
 *  it under the terms of the GNU General Public License as published by  
 *  the Free Software Foundation, either version 3 of the License, or  
 *  (at your option) any later version.  
 *   
 *  This program is distributed in the hope that it will be useful,  
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of  
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the  
 *  GNU General Public License for more details.  
 *   
 *  You should have received a copy of the GNU General Public License  
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona
 */
#include <WaspSigfox.h>

//////////////////////////////////////////////
uint8_t socket = SOCKET0;
//////////////////////////////////////////////

uint8_t error;

// define TEST settings
/////////////////////////////////////////////
uint16_t  counter = 10;
uint16_t  period  = 10;
int16_t   channel = -1;
/////////////////////////////////////////////


void setup() 
{
  USB.ON();  
  
  
  //////////////////////////////////////////////
  // switch on
  //////////////////////////////////////////////
  error = Sigfox.ON(socket);
  
  // Check sending status
  if( error == 0 ) 
  {
    USB.println(F("Switch ON OK"));     
  }
  else 
  {
    USB.println(F("Switch ON ERROR")); 
  }    
  
  
  //////////////////////////////////////////////
  // Perform SIGFOX TX test
  //////////////////////////////////////////////

  Sigfox.testTransmit(counter,period,channel);
   
  // Check sending status
  if( error == 0 ) 
  {
    USB.println(F("Sigfox TX test: OK"));
  }
  else 
  {
    USB.println(F("Sigfox TX test: ERROR"));
  }       
  
  USB.println(F("----------------------------------------------"));

}


void loop() 
{

  delay(10000);
}

Output

H#
Switch ON OK
Sigfox TX test: OK
----------------------------------------------

Quick Publish: