Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» SW 01: pH sensor

Turn on the Smart Water Board and reads the pH sensor extracting the value from the calibration values and temperature compensation

Required Materials

1 x Waspmote
1 x Battery
1 x Smart Water Sensor Board
1 x pH Sensor
1 x pH Calibration Kit (for those sensors which require calibration)
1 x PT1000 temperature sensor (for temperature compensation)

Notes

- The calibration values selected in the code are an example for a specific sensor, each unit will require its own calibration parameters.
- If the sensor has been kept stored for long it may take longer to reach a steady output.
- In case calibration or temperature compensation are considered unnecessary function pHConversion can be called without them. - Take a look at section “API” of the Smart Water Technical Guide for more information.
- This example is valid for Waspmote v12 and Waspmote v15

Code

/*
    ------ [SW_01] - pH sensor Reading for Smart Water--------

    Explanation: Turn on the Smart Water Board and reads the pH sensor
    extracting the value from the calibration values and temperature
    compensation

    Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L.
    http://www.libelium.com

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

    Version:           3.0
    Design:            David Gascón
    Implementation:    Ahmad Saad
*/

#include <WaspSensorSW.h>

float pHVol;
float temp;
float pHValue;

// Calibration values
#define cal_point_10  1.985
#define cal_point_7   2.070
#define cal_point_4   2.227

// Temperature at which calibration was carried out
#define cal_temp 23.7

pHClass pHSensor;
pt1000Class temperatureSensor;


void setup()
{
  USB.ON();
  USB.println(F("pH example for Smart Water..."));
  
  // Store the calibration values 
  pHSensor.setCalibrationPoints(cal_point_10, cal_point_7, cal_point_4, cal_temp);

  ///////////////////////////////////////////
  // 1. Turn ON the Smart Water sensor board 
  ///////////////////////////////////////////  
  Water.ON(); 
}


void loop()
{
  ///////////////////////////////////////////
  // 2. read the sensors
  ///////////////////////////////////////////   
  
  // Read the ph sensor (voltage value)
  pHVol = pHSensor.readpH();
  // Read the temperature sensor
  temp = temperatureSensor.readTemperature();
  // Convert the value read with the information obtained in calibration
  pHValue = pHSensor.pHConversion(pHVol, temp);
 
  ///////////////////////////////////////////
  // 3. Print the output values
  ///////////////////////////////////////////
  
  USB.print(F("pH value: "));
  USB.print(pHVol);
  USB.print(F("volts  | "));
  USB.print(F(" Temperature: "));
  USB.print(temp);
  USB.print(F("degrees  | "));  
  USB.print(F(" pH Estimated: "));
  USB.println(pHValue);


}

Output

H#
pH value: 2.2510616779volts | temperature: 20.3847656250degrees | pH Estimated: 3.8090739250
pH value: 2.2498335838volts | temperature: 20.4285888671degrees | pH Estimated: 3.8315755844
pH value: 2.2496614456volts | temperature: 20.4486083984degrees | pH Estimated: 3.8348851203
pH value: 2.2493996620volts | temperature: 20.4590148925degrees | pH Estimated: 3.8396921157
pH value: 2.2490675449volts | temperature: 20.4725646972degrees | pH Estimated: 3.8457942008
...

Quick Publish: