Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» UT 09: Analog pins

This example shows how to set up the power supply lines in the Waspmote I/O sockets

Required Materials

1 x Waspmote
1 x MiniUSB wire
1 x Battery

Notes

This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------ [UT_09] - Analog pins -------- 
 *
 *  Explanation: This example shows how to set up the power supply lines
 *  in the Waspmote I/O sockets
 *
 *  Copyright (C) 2016 Libelium Comunicaciones Distribuidas S.L. 
 *  http://www.libelium.com 
 *  
 *  This program is free software: you can redistribute it and/or modify 
 *  it under the terms of the GNU General Public License as published by 
 *  the Free Software Foundation, either version 3 of the License, or 
 *  (at your option) any later version. 
 *  
 *  This program is distributed in the hope that it will be useful, 
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of 
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
 *  GNU General Public License for more details. 
 *  
 *  You should have received a copy of the GNU General Public License 
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>. 
 *  
 *  Version:           3.0
 *  Design:            David Gascon 
 *  Implementation:    Yuri Carmona
 */

// define variables
int analog1;
int analog2;
int analog3;
int analog4;
int analog5;
int analog6;
int analog7;

void setup()
{
  USB.ON();
  USB.println(F("UT_09 example"));
  USB.println(F("------------------------------------------"));
  USB.println(F("Analog output (0 - 3.3V): from 0 to 1023"));
  USB.println(F("------------------------------------------"));
}


void loop()
{
  // read analog pins
  analog1 = analogRead(ANALOG1);
  analog2 = analogRead(ANALOG2);
  analog3 = analogRead(ANALOG3);
  analog4 = analogRead(ANALOG4);
  analog5 = analogRead(ANALOG5);
  analog6 = analogRead(ANALOG6);
  analog7 = analogRead(ANALOG7);
  
  // show values
  USB.print(F("ANALOG1: "));
  USB.println(analog1);
  USB.print(F("ANALOG2: "));
  USB.println(analog2);
  USB.print(F("ANALOG3: "));
  USB.println(analog3);
  USB.print(F("ANALOG4: "));
  USB.println(analog4);
  USB.print(F("ANALOG5: "));
  USB.println(analog5);
  USB.print(F("ANALOG6: "));
  USB.println(analog6);
  USB.print(F("ANALOG7: "));
  USB.println(analog7);

  USB.println(F("------------------------------------------"));
  delay(1000);
}


Output

H#
UT_09 example
------------------------------------------
Analog output (0 - 3.3V): from 0 to 1023
------------------------------------------
ANALOG1: 4
ANALOG2: 9
ANALOG3: 38
ANALOG4: 29
ANALOG5: 251
ANALOG6: 149
ANALOG7: 111
------------------------------------------
ANALOG1: 58
ANALOG2: 45
ANALOG3: 56
ANALOG4: 42
ANALOG5: 219
ANALOG6: 150
ANALOG7: 110
------------------------------------------
ANALOG1: 63
ANALOG2: 48
ANALOG3: 59
ANALOG4: 42
ANALOG5: 207
ANALOG6: 141
ANALOG7: 103
------------------------------------------

Quick Publish: