Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Wifi 02: Switch on (SOCKET1)

This example shows how to switch on the module in the SOCKET1.

Required Materials

1 x Waspmote
1 x Battery
1 x WiFi Module
1 x Expansion Board

Notes

- The battery has to be connected.
- Plug the antenna in the SMA connector.
- The Wifi module is connected on the expansion board.
- This example can be executed in Waspmote v12 and Waspmote v15

Code

/*
 *  ------Waspmote WIFI_01 Example--------
 *
 *  This example shows how to switch on the module in the SOCKET1.
 *  Besides, resetValues function is called in order to reset the 
 *  configuration of the module. 
 *  
 *  Copyright (C) 2013 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 2 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 *  Version:                0.2
 *  Design:                 David Gascón
 *  Implementation:         Joaquin Ruiz
 */

// Include WIFI library 
#include <WaspWIFI.h>

// choose socket (SELECT USER'S SOCKET)
///////////////////////////////////////
uint8_t socket=SOCKET1;
///////////////////////////////////////


void setup()
{   
  // 1. Switch ON the WiFi module on the desired socket
  if( WIFI.ON(socket) == 1 )
  {    
    USB.println(F("WiFi switched ON"));
  }
  else
  {
    USB.println(F("WiFi did not initialize correctly"));
  }
  
  // 2. Reset to default values
  USB.println(F("Resetting to Default values..."));
  WIFI.resetValues();
  
  USB.println(F("setup done"));
  
}

void loop()
{
  // Switch ON the WiFi module on the desired socket
  if( WIFI.ON(socket) == 1 )
  {
    USB.println(F("WiFi switched ON"));
  }
  else
  {
    USB.println(F("WiFi did not initialize correctly"));
  }  
   
  
  // Switch OFF the WiFi module
  WIFI.OFF();
  USB.println(F("WiFi OFF"));

  // delay
  delay(2000);
}

Output

H#
WiFi switched ON
Resetting to Default values...
setup done
WiFi switched ON
WiFi OFF
WiFi switched ON
WiFi OFF
WiFi switched ON
WiFi OFF
WiFi switched ON
WiFi OFF
...

Quick Publish: