Development v12

Warning - Product Update

All the resources present on this section belong to Waspmote v12, Waspmote Plug & Sense! v12 and Meshlium v3.8.

If you have a Waspmote v15, Waspmote Plug & Sense! v15 or Meshlium v4.0 please go to the new Development Section.

Check what is your version and what are the differences between the old and the new one in this document.

» Wifi 03: Display module status

This example shows how to get the status of the different WIFI module features.

Required Materials

1 x Waspmote
1 x Battery
1 x Wifi Module

Notes

- The battery has to be connected.
- Plug the antenna in the SMA connector.
- This example can be executed in Waspmote v12 and Waspmote v15
- REMEMBER TO UNCOMMENT THE DEFINITON OF DEBUG_MODE IN WaspWIFI.h

Code

/*
 *  ------Waspmote WIFI_03 Example--------
 *
 *  Explanation: This example shows how to get the status of the different
 *  WIFI module features.
 *  Remarks: DEBUG mode must be enabled before compiling this example. Please
 *  check the WaspWIFI.h file and uncomment the "#define DEBUG_WIFI" definition
 *  
 *  Copyright (C) 2013 Libelium Comunicaciones Distribuidas S.L.
 *  http://www.libelium.com
 *
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 2 of the License, or
 *  (at your option) any later version.
 * 
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 * 
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 *  Version:                0.2
 *  Design:                 David Gascón
 *  Implementation:         Joaquin Ruiz
 */
 
// Include WIFI library 
#include <WaspWIFI.h>

/****************************************
REMEMBER TO UNCOMMENT THE DEFINITON 
OF DEBUG_MODE IN WaspWIFI.h
*****************************************/

// choose socket (SELECT USER'S SOCKET)
///////////////////////////////////////
uint8_t socket=SOCKET0;
///////////////////////////////////////

void setup()
{
  // Switch ON the WiFi module on the desired socket
  if( WIFI.ON(SOCKET0) == 1 )
  {    
    USB.println(F("Wifi switched ON"));
  }
  else
  {
    USB.println(F("Wifi did not initialize correctly"));
  }

}

void loop()
{
  // Displays Firmware version
  USB.println(F("\n----------------------"));
  USB.println(F("Firmware Version:"));
  USB.println(F("----------------------"));
  WIFI.getVersion();
  
  // Displays connection status.  
  USB.println(F("\n----------------------"));
  USB.println(F("Connection Info:"));
  USB.println(F("----------------------"));
  WIFI.getConnectionInfo();
  
  // Displays Access Point status.
  USB.println(F("\n----------------------"));
  USB.println(F("AP Status:"));
  USB.println(F("----------------------"));
  WIFI.getAPstatus();
  
  // Displays singal strenght information.
  USB.println(F("\n----------------------"));
  USB.println(F("RSSI:"));
  USB.println(F("----------------------"));
  WIFI.getRSSI();
  
  // Displays the statistics of the sent and received packets.
  USB.println(F("\n----------------------"));
  USB.println(F("Statistics:"));
  USB.println(F("----------------------"));
  WIFI.getStats();
  
  // Diplays the seconds since last powerup or reboot.
  USB.println(F("\n----------------------"));
  USB.println(F("Up Time:"));
  USB.println(F("----------------------"));
  WIFI.getUpTime();
  
  // Diplays adhoc settings.
  USB.println(F("\n----------------------"));
  USB.println(F("Adhoc Settings:"));
  USB.println(F("----------------------"));
  WIFI.getAdhocSettings();
  
  // Displays broadcast settings.
  USB.println(F("\n----------------------"));
  USB.println(F("Broadcast Settings:"));
  USB.println(F("----------------------"));
  WIFI.getBroadcastSettings();
  
  // Displays communications settings.
  USB.println(F("\n----------------------"));
  USB.println(F("Communication Settings:"));
  USB.println(F("----------------------"));
  WIFI.getComSettings();
  
  // Displays DNS settings.
  USB.println(F("\n----------------------"));
  USB.println(F("DNS Settings:"));
  USB.println(F("----------------------"));
  WIFI.getDNSsettings();
  
  // Displays FTP settings.
  USB.println(F("\n----------------------"));
  USB.println(F("FTP Settings:"));
  USB.println(F("----------------------"));
  WIFI.getFTPsettings();
  
  // Displays IP settings.
  USB.println(F("\n----------------------"));
  USB.println(F("IP Settings:"));
  USB.println(F("----------------------"));
  WIFI.getIP();
  
  // Displays the MAC address.
  USB.println(F("\n----------------------"));
  USB.println(F("MAC Settings:"));
  USB.println(F("----------------------"));
  WIFI.getMAC();
  
  // Displays option settings.
  USB.println(F("\n----------------------"));
  USB.println(F("Option Settings:"));
  USB.println(F("----------------------"));
  WIFI.getOptionSettings();
  
  // Displays system settings.
  USB.println(F("\n----------------------"));
  USB.println(F("System Settings:"));
  USB.println(F("----------------------"));
  WIFI.getSystemSettings();


  USB.println(F("\n*******************************************"));
  delay(10000);
}

Output

H#
*OFF
enter CMD at 115200
Wifi switched ON

----------------------
Firmware Version:
----------------------
Ver 2.32, 02-13-2012 on RN-171
<2.32>

----------------------
Connection Info:
----------------------
Chann: 6
TCP status = NOIP

----------------------
AP Status:
----------------------
SSid=roving1
Chan=6
Assoc=FAIL
Rate=12, 24Mb
Auth=FAIL
Mode=NONE
DHCP=FAIL
Boot=0
Time=OK
Links=0
<2.32>

----------------------
RSSI:
----------------------
RSSI=(-5) dBm
<2.32>

----------------------
Statistics:
----------------------
Conns=0, WRX=0/0, WTX=0/0, RTRY=0, RTRYfail=0
URX=0, UTX=245, RXdrop=0, RXerr=386,
FlwSet=0, FlwClr=0
TX-UDP=0, netbufs=0, evt=0, adhoc_lost=0
Boots=1, Wdogs=0,TXon=0
<2.32>
WRX:0
WTX:0
flwSet:0

----------------------
Up Time:
----------------------
Time NOT SET
UpTime=7 s
<2.32>

----------------------
Adhoc Settings:
----------------------
Beacon=100
Probe=5
Reboot=0
<2.32>

----------------------
Broadcast Settings:
----------------------
BCAST=255.255.255.255:55555
Interval=0x7
<2.32>

----------------------
Communication Settings:
----------------------
OPEN=*OPEN*
CLOSE=*CLOS*
REMOTE=*HELLO*
FlushSize=900
MatchChar=0
FlushTimer=10
IdleTimer=0
CmdChar=$
<2.32>

----------------------
DNS Settings:
----------------------
DNS=0.0.0.0
Name=server1
Backup=backup2
<2.32>

----------------------
FTP Settings:
----------------------
FTP=208.109.78.34:21
File=wifly-EZX.img
User=roving
Pass=Pass123
Dir=public
Timeout=80
FTP_mode=0x0
<2.32>

----------------------
IP Settings:
----------------------
IF=DOWN
DHCP=ON
IP=0.0.0.0:2000
NM=255.255.255.0
GW=0.0.0.0
HOST=0.0.0.0:2000
PROTO=TCP,
MTU=1524
FLAGS=0x7
TCPMODE=0x0
BACKUP=0.0.0.0
<2.32>

----------------------
MAC Settings:
----------------------
Mac Addr=00:06:66:80:c2:b7
<2.32>

----------------------
Option Settings:
----------------------
JoinTmr=1000
Replace=0x24
DeviceId=WiFly-EZX
Password=
Format=0x0
Signal=0
Average=5
<2.32>

----------------------
System Settings:
----------------------

SleepTmr=0
WakeTmr=0
Trigger=0x1
Autoconn=0
IoFunc=0x0
IoMask=0x21f0
IoValu=0x0
DebugReg=0x0
PrintLvl=0x4000
<2.32>

*******************************************

Quick Publish: