Search found 11 matches

by manchego
Fri May 15, 2015 10:26 am
Forum: Repository Code for Developers
Topic: Little bug in BLE library
Replies: 1
Views: 6955

Little bug in BLE library

Hi, I am using Waspmote with Bluetooth Low Energy radio, and I have found a little bug in the BLE library: In "setScanningParameters" method (line 1544 from stable library), when the minimun limit of scan window is reviewed, it is set to 0x40, instead of 0x04, which actually is the minimun range. Th...
by manchego
Tue Apr 28, 2015 2:21 pm
Forum: General Questions
Topic: Waspmote failure
Replies: 9
Views: 4224

Re: Waspmote failure

Ok, thanks a lot for your help and support.

Regards.
by manchego
Tue Apr 28, 2015 11:58 am
Forum: General Questions
Topic: Waspmote failure
Replies: 9
Views: 4224

Re: Waspmote failure

Hi,

The answers to the questions are:
1. Yes, the Waspmote is detected by the PC
2. Yes, the power led is green when I connect the Waspmote via USB.
3. No, I can't see anything when I press the reset button. There isn't any led which blinks and nothing else happens.

What could it be?
by manchego
Mon Apr 27, 2015 6:37 pm
Forum: General Questions
Topic: Waspmote failure
Replies: 9
Views: 4224

Re: Waspmote failure

Hi Libelium-dev,

No, I can't see anything using the serial monitor, and the LEDs don't blink, and they have to do it with the "hello world" example.

Regards.
by manchego
Mon Apr 27, 2015 2:43 pm
Forum: General Questions
Topic: Waspmote failure
Replies: 9
Views: 4224

Re: Waspmote failure

Hi Libelium, Thanks a lot for your reply. I'm doing these steps in order, but when I try to upload the code, the message avrdude "stk500_getsync(): not in sync: resp=0x00" is showed. I'm trying to program the Waspmote with the hello_world code example, but it doesn't work. It works if I use another ...
by manchego
Mon Apr 27, 2015 1:21 pm
Forum: General Questions
Topic: Waspmote failure
Replies: 9
Views: 4224

Waspmote failure

Hi Libelium, I have a problem with a Libelium Waspmote. It worked correctly, but today, when I want to reprogram it, it doesn't response, and I get the follow response in the Waspmote PRO IDE: avrdude: stk500_getsync(): not in sync: resp=0x00 The Waspmote is on, and the serial port selected in the I...
by manchego
Thu Feb 26, 2015 11:50 am
Forum: Networking 802.15.4 / ZigBee / WIFI / GPRS / 3G / Industrial protocols...
Topic: Problems to connect two slaves to master simultaneusly
Replies: 3
Views: 3184

Re: Problems to connect two slaves to master simultaneusly

Hi libelium-dev,

Thanks a lot for your reply. I have to change my original idea then...

I would like to ask you if we will be able to connect multiple slaves to a master simultaneusly in the future?

Thank you again for your help,

manchego
by manchego
Wed Feb 25, 2015 10:23 am
Forum: Networking 802.15.4 / ZigBee / WIFI / GPRS / 3G / Industrial protocols...
Topic: Problems to connect two slaves to master simultaneusly
Replies: 3
Views: 3184

Re: Problems to connect two slaves to master simultaneusly

Hi everyone again! I would like to include new information, because it could be useful with this problem. When I connect directly the first device there is not problem, but the answer received in the second connection (command 'BLE.connectDirect(MAC)') is as follows: 000306030902BD00 Then, the error...
by manchego
Tue Feb 24, 2015 12:57 pm
Forum: Networking 802.15.4 / ZigBee / WIFI / GPRS / 3G / Industrial protocols...
Topic: Problems to connect two slaves to master simultaneusly
Replies: 3
Views: 3184

Problems to connect two slaves to master simultaneusly

Hi, I'm trying to connect two waspmote devices to one master simultaneusly, in a star topology ble network. This is possible? I have read that it is possible, but I can't to do it. I can connect one slave without problems, and two slaves with time slots: first connect and disconnect one, and then co...
by manchego
Fri Feb 13, 2015 3:05 pm
Forum: Networking 802.15.4 / ZigBee / WIFI / GPRS / 3G / Industrial protocols...
Topic: Handle attribute in BLE master-slave network
Replies: 3
Views: 3072

Re: Handle attribute in BLE master-slave network

Hi libelium-dev!

Thanks for your reply. I had seen the way to write a local attribute, but I wasn't able to do it...

Your suggested post is very useful for me, you solved all my doubts by the moment and my master-slave connection is working!

Thank you very much again!